main logo

Waveshare Ups Hat For Zero

I 10 migliori prodotti di maggio 2025
Ultimo aggiornamento: 6 maggio 2025
Waveshare
Waveshare
Waveshare UPS Hat (C) for Raspberry Pi Zero 5V Uninterruptible Power Supply Multi Battery Protection Circuits(Battery is not included)
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Alimenta il tuo Pi Zero senza problemi dalla connessione di alimentazione o dalle batterie di riserva
  • Supporta la ricarica e l'uscita regolata da 5 V allo stesso tempo, monitoraggio I2C
  • Perni pogo a molla integrati per il collegamento con schede Raspberry Pi serie Zero. Chip di ricarica della batteria Li-Po, con gestione dinamica del percorso, alimentazione più stabile
  • Chip di aumento della tensione, che fornisce un'uscita di potenza regolata da 5 V. Comunicazione bus I2C, monitoraggio della tensione della batteria, corrente, potenza e capacità residua in tempo reale
  • Multi circuiti di protezione della batteria: protezione da sovraccarico/scarica, protezione da sovracorrente e protezione da cortocircuito, più sicuro e stabile. Indicatore di ricarica per monitorare lo stato di funzionamento della batteria. Viene fornito con risorse di sviluppo e manuale
  • 28,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Raspberry Pi Uninterruptible Power Supply UPS HAT Stable 5V Power Output Multi Battery Protection Circuits
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#2

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/Zero WH
  • 33,95 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • 69,99 € SU AMAZON
Waveshare
Waveshare
Waveshare UPS HAT (B) for Raspberry Pi 5V Uninterruptible Power Supply 5A High Current with Pogo Pins Connector
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.
  • I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
  • Multi battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
  • Onboard 5V regulator, up to 5A continuous output current, more sufficient power source for Raspberry Pi
  • 5V USB output, convenient for powering other boards Batteries warning indicators, easy to check if the battery is connected correctly
  • 31,99 € SU AMAZON
Waveshare
Waveshare
Waveshare Motor Driver Hat for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C Interface Drive Two DC Motors DIY Mobile Robots
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. È una scelta ideale per te per robot mobili.
  • Raspberry Pi connettività, compatibile con Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ I2C controlled, by setting 5 address jumpers, it is stackable up to 32 this module
  • Onboard PCA9685 chip, fornisce 12-bit hardware PWM per regolare la velocità del motore Onboard TB6612FNG dual H-bridge motor driver, alta efficienza, low heating
  • Integrates 5V regolatore, up to 3A output current, can be powered from battery through VIN terminal
  • Riservato I2C control pins, allows to work with other control board Comes with development resources and manual (examples in BCM2835, wiringPi, and piton)
  • 21,99 € SU AMAZON
Waveshare
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • ✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
  • ✅4x extended USB ports, compatible with USB 2.0 / 1.1
  • ✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
  • ✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
  • 16,15 € SU AMAZON
Waveshare
Waveshare
Waveshare UPS HAT 5V Gruppo di Continuità per Raspberry Pi 4B/3B+/3B, fino a 5A di Corrente, Pogo Pins Connettore, Integrato Regolatore 5V e Circuiti di Protezione Multibatteria, I2C Bus
star

80

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • 【5V UPS HAT (B) for Raspberry Pi】Uninterruptible Power Supply designed for Raspberry Pi series, compatible with Raspberry Pi 3 / 3B+ / 4B, etc. powering the Raspberry Pi via Pogo Pins, without using any GPIO resource
  • 【Real Time Monitoring】I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real-time via I2C
  • 【Safe and Stable Circuit Design】Multi battery protection circuits for over charge/discharge, over current, short circuit, and reverse, along with the equalizing charge feature, more safe and stable
  • 【5V USB Output As Well】5V USB output, convenient for powering other boards
  • 【Battery Warning Indicators】Easy to check if the battery is connected correctly
  • 34,95 € SU AMAZON
Waveshare
Waveshare
2.13inch E-Paper HAT+ For Raspberry Pi 5/4B/3B/Zero/Zero W/Jetson Nano,250x122 Pixels e-ink Display HAT V4,Black and White epaper Screen,SPI Interface
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • 2.13inch E-Paper HAT+ For Raspberry Pi/ Jetson Nano,Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Onboard high-precision RTC chip for accurate time control.Optimized PCB layout with additional mounting holes for fixing screws
  • Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications
  • No backlight, keeps displaying last content for a long time even when power down
  • Comes with online development resources and manual,driver board circuit diagram,examples for Raspberry Pi OS / Jetson Nano, etc. and provides pwnagotchi porting tutorial
  • 26,89 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.15inch e-Paper HAT+ (G), Compatible with Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, 296x160, Red/Yellow/Black/White, SPI Interface E-ink Display with Driver Board
Spedizione gratuita
star

75

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano, RDK X3 Adopts Raspberry Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • Adapting SPI interface for connecting with controller boards like Raspberry Pi / Arduino / STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
  • 25,99 € SU AMAZON
Waveshare
Waveshare
Waveshare V4 2.13inch E-Paper HAT+ for Raspberry Pi 5 /for Raspberry Pi Zero 2 W/for Raspberry Pi 3 B/for Raspberry Pi 4B /for Pi Pico W, 250x122, SPI, HAT+ Standard E-ink Display for pwnagotchi kit
Spedizione gratuita
star

66

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 2.13″ E-Paper HAT+, compared to the previous Waveshare V2, Waveshare V3 and Waveshare V4 basic versions, this latest V4 version with upgraded HAT+ Standard brings improved interoperability. Support Partial Refresh, Low Power, 170° Wide Viewing Angle, Black and White Color, Paper-Like Effect
  • With standard Pi 40PIN GPIO Header, compatible With Raspberry Pi Series Boards/Jetson Nano. Onboard high-precision RTC chip for accurate time control. Optimized PCB layout with additional mounting holes for fixing screws
  • Adopts Immersion Gold process, anti-oxidation and anti-corrosion, enhances soldering performance and improves electrical properties, with better durability and reliability to meet various applications. Thin and light design, compact in Size, more space-saving
  • Adopts Pi HAT+ standard to improve interoperability, helping the users to design and develop faster, easy to use with other peripherals and extend more functions for Raspberry Pi
  • No backlight required, can maintain the display content of the last screen for a long time when powered off. Can provide with online development resources and manual, such as driver board circuit diagram, examples for Raspberry Pi OS/Jetson Nano and can provide pwnagotchi porting tutorial
  • 27,99 € SU AMAZON
waveshare ups hat