Stm32 Nano
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
7 ottobre 2025
Waveshare
USB a CAN Adattatore Analizzatore CAN Bus Convertitore Basato su Chip STM32, Supporta Windows 11/10/8/7/XP e Raspberry Pi OS/Jetson Nano Ubuntu ecc. Sistemi Linux, con Cavo USB
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
USB to CAN Bus adapter analyzer collects data from CAN bus to PC via USB for transceiver control, data analysis, acquisition and monitoring of CAN bus network, supports CAN2.0A (standard frame) and CAN2.0B (extended frame), CAN baud rate is configurable in the range of 5Kbps-1Mbps
USB to CAN converter model support Windows XP/7/8/10/11 and Linux systems such as Raspberry Pi OS and Ubuntu under Jetson Nano, easy secondary development, just need to modify the sending and receiving commands, adopts the original STM32F103 chip, stable and reliable communication
Supports 4 working modes: normal mode, loopback mode, silent mode, silent loopback mode
Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly and cyclic sending, Supports multiple CAN data receiving modes: can be configured to only receive data from a certain ID, or specify ID to automatically answer the configured data. Data can be saved as TXT or Excel
Supports CAN bus detection for status checking, Sending/receiving CAN data with time scale, allows sequentially displaying, Baud rate of USB virtual COM port is configurable in the range of 9600 ~ 2000000bps (2000000bps by default)
28,99 € SU AMAZON
Waveshare
Waveshare SIM7600E-H 4G-Module,utilizzato per l'accesso Internet dial-up Windows/Linux,comunicazione piattaforma cloud,localizzazione GNSS, compatibile con Raspberry Pi/Jetson Nano/ESP32/STM32
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Applicazione tipica: utilizzata per medici e saluti, pagamenti intelligenti, intercom di rete pubblica, monitoraggio ambientale, monitoraggio dell'energia, gestione delle fleet, industria intelligente, agriculture. Con 3 connettori antenna IPEX, viene fornito con 2 teste a pin giallo e antenna FPC. Regioni applicabili: Europe/Southeast Asia/Ovest Asia/Africa/Cina/Corea
Compatibile con rete 2G/3G/4G con supporto globale. Supporta dial-up, chiamate telefoniche, SMS/TCP/UDP/MQTT/DTMF/HTTP/FTP, ecc. Supporta GPS/BeiDou/Glonass/GALILEO/QZSS/LBS. Interfaccia USB integrata e UART, per accesso internet dial-up, comunicazione piattaforma cloud, posizionamento GNSS, ecc
Fori castellati con design oro immersione, di piccole dimensioni, facile da inserire nel dispositivo mediante saldatura diretta o inserting tramite la testa del pin. Adattamento USB/UART/SIM card/GPIO pin di controllo, facile da sviluppare e debug, migliore espansibilità. Trasduttore di tensione integrato, compatibile con schede madri MCU da 3,3 V/5 V come STM32/ESP32
Supporta diversi metodi di alimentazione: porta USB, pin VIN e pin VBAT (per battuta al litio da 3,7 V). Supporta alimentazione di tensione larga 5 ~ 26 V e uscita ad alta corrente da 3 A, per evitare che i moduli cadano e restarting a causa del grande consumo di energia istantaneo, più stabile e affidabile nell'uso industriale
Slot per schede Nano SIM integrate, supporta schede SIM da 1,8 V e 3 V, near the edge of the board design, for easy accessing SIM card. Con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/STM32)
67,99 € SU AMAZON
coolwell
2.42 Inch OLED Display Module for for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32/ESP32/Jetson Nano 128×64 Resolution SPI / I2C (bianca)
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
2.42 inch OLED display for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W, ultra-narrow bezel, conpact size, with onboard voltage translator
2.42 inch OLED module for Arduino, adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
2.42 inch OLED module for Jetson Nano, comes with online development resources (examples for Raspberry Pi/Raspberry Pi Pico/Arduino/STM32/ESP32/Jetson Nano)
21,11 € SU AMAZON
Waveshare
Waveshare USB to CAN Adapter Analyzer, Adopts STM32 Chip Scheme, 4 Working Modes, Stable Communication, for Windows XP/7/8/10/11, for Raspberry Pi OS/Jetson Nano Ubuntu and Other Linux System
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
The data of CAN bus can be collected to the PC via USB to realize the receiving and transmitting control, data analysis, collection and monitoring of the CAN Bus Network
Support CAN2.0A (standard frame) and CAN2.0B (extended frame). Support CAN communication baud rate range: 5kbps~1Mbps, can customize CAN baud rate. Support multiple CAN data receiving methods: it can be configured to receive only the data with the specified ID, or specify the ID to automatically respond to the configured data
Supports 4 Working Modes: normal mode, loopback mode, silent mode, and silent loopback mode. Support multiple CAN data Transmission Modes: single frame transmission, multi frame transmission, manual transmission, timed transmission and cyclic transmission
Adopts the Original STM32F103 Chip, more stable and reliable communication. Support to set the communication baud rate of USB virtual COM port (9600~2000000bps), the default is 2000000bps
Supports Windows XP/7/8/10/11, Compatible with Raspberry Pi OS/Jetson Nano Ubuntu and other Linux Systems, Supports Secondary Development(Just deal with the receiving and sending commands)
29,99 € SU AMAZON
Waveshare
1.5inch RGB OLED Display Module 128x128 16-bit High Color SPI Interface SSD1351 Driver Fits Raspberry Pi/Jetson Nano/STM32 Examples Provided
Spedizione gratuita
87
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface
128x128 high resolution, 65K colors, clearly displays colorful images
Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), development resources: www.waveshare.com/wiki/1.5inch_RGB_OLED_Module
24,95 € SU AMAZON
Waveshare
Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 € SU AMAZON
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
24,99 € SU AMAZON
HOUSHANG
HOUSHANG MKS STM32 3D printer board MKS Robin Nano board V1.2 Open source hardware (Marlin2.0 support) Support with 3.5 inch touch screen (MKS RobinV1.2) (MKS-RobinV1.2)
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
<P>Brand HOUSHANG<Br> Material Metal<Br> Product dimensions 10P x 15l x 3H cm<Br> Item weight 20 grams<Br> Compatible devices ：ordinateurs portables<Br> Origin : CN (origin)<Br> Item Type : Motherboard<Br> Model Number : MKS Robin Nano<Br>
30,86 € SU AMAZON
LUCKFOX
LUCKFOX 2-Inch 262K Color LCD Display Module, 240(V) x 320(H) RGB Resolution IPS Screen, 3.3V/5V, SPI Interface, Compatible with Raspberry Pi/Jetson Nano/VisionFive2/STM32
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Working voltage: 3.3V/5V (please ensure that the power supply voltage is consistent with the logic voltage, otherwise it will not work properly)
Resolution: 240 (V) x 320 (H) RGB
Display size: 30.60 (H) x 40.80 (V) mm
Provide complete routine for raspberry pi(BCM2835 library/WiringPi library/Python routine)/STM32 routine, etc. Please ask 24-hour customer service for relevant Routine data
You can also connect it to Pi microcontrollers and program it to play video or video games (but please note that such programming is not provided)
18,99 € SU AMAZON
Waveshare
Waveshare 4.2 Inch E-Paper Display Module(B) Kit 400x300 Resolution Red Black White Three-Color E-Ink Screen Electronic Paper Module for Raspberry Pi/Jetson Nano/Arduino/STM32 via SPI Interface
Spedizione gratuita
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display.
Onboard voltage translator, compatible with 3.3V/5V MCUs
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down ; Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Ultra low power consumption, basically power is only required for refreshing;SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
45,99 € SU AMAZON
stm32
#1 VINCITORE
