Sata Raspberry Pi
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
5 ottobre 2025
Geekworm
Geekworm X1100 2.5" SATA HDD/SSD Shield for Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【2.5" SATA HDD/SSD Supported】Compatible with 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD). The HDD / SSD are NOT included
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Raspberry Pi official power adapter, or Geekworm PD 27W power adapter (ASIN: B0CZCZF2QV / B0FGPSRQ75)
【Packing List】1 x X1100 Shield, 1x Screws Pack accessories
【Matching Case (NOT included)】Refer to X1100-C1 Case ASIN: B0D7VFTHTD
35,00 € SU AMAZON
ODSS
Raspberry Pi 5 Penta SATA HAT, fino a 5 dischi SATA HAT
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Confezione: 1 cappello Penta SATA
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 SATA + 1 interfaccia eSATA
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
109,83 € SU AMAZON
DollaTek
DollaTek WX820 Scheda di espansione HDD/SSD SATA da 2,5 Pollici per Raspberry Pi 1 Modello B + / 2 Modello B / 3 Modello B
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Supporta dischi rigidi SATA da 2,5 pollici (HDD) / unità a stato solido (SSD)
Soluzione di conservazione ideale per Raspberries Pi; Porta HDMI Raspberry Pi duplicata
Controller bridge da USB 3.1 Gen1 a SATA 6Gb / s, la connettività USB 2.0 offre funzionalità plug-and-play su Raspberry Pi
Trasferimento rapido di file con connettività USB 3.0 ad alta velocità da un PC o Mac. Alimentazione esterna esterna - Non richiede alimentazione dalla porta USB Raspberry Pi
Alimenta il Raspberry Pi: non è necessario alcun alimentatore esterno
39,99 € SU AMAZON
APBVIHL
Raspberry Pi 5 Penta SATA HAT con Top Board - Fino a 5 dischi SATA HAT
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
La confezione contiene: 1 cappello Penta Sata+tavola superiore
Perfettamente supportato da Raspberry Pi serie 5
La soluzione perfetta per server NAS: 4 Sata + 1 interfaccia eSata
Opzioni di interfaccia di alimentazione flessibile: interfaccia di alimentazione ATX standard o interfaccia di alimentazione CC 12V
Ulteriori interfacce di espansione: progettato per supportare display OLED e ventola
114,20 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 SATA Storage, X825 V2.0 Scheda di espansione HDD/SSD SATA da 2,5 pollici per Raspberry Pi 4 (non include Raspberry Pi o HDD/SSD)
Spedizione gratuita
84
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【Update】X825 V2.0 is the updated version from X825 V1.5. You can use X825 with your raspberry pi 4 and 2.5 inch SATA HDD / SSD
【How to Power】√ Model 1. power via X825 DC Jack: 5V ≥3A with DC 5521 Jack; √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Packing List】X825 V2.0 Board * 1, USB 3.1 Connector * 1, Mounting Screw Pack * 1
【Document】User Manual: wiki.geekworm.com/X825_V2.0; Installation video: youtu.be/JxUNhIxXgj4
【Matching Metal Case】X825 V2.0 only compatible with X825-C8 Case (ASIN: B09295FHBW), X825-C8 Case compatible with max. 9.5mm HDD/SSD. Also fit with X735 Cooling & Power Mgnt Board (ASIN: B07NLR49L1)
35,00 € SU AMAZON
Geekworm
Geekworm X825-C8 Case, Only Support X825 V2.0 2.5 Inch SATA SSD/HDD Shield & Raspberry Pi 4 & X735 (Raspberry Pi / X825 / X735 Not Included)
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Packing List】X825-C8 Metal Case x 1, Momentary Power Switch x 1, 4010 Cooling Fan x 1
【Application】for use with Raspberry Pi 4 with X825 V2.0 2.5 inch SATA HDD/SSD Expansion Board (ASIN: B091JSRQ9C) and X735 (ASIN: B07NLR49L1)
【Note】NOT include Raspberry Pi 4 / X825 / X735/ SSD / HDD!
【Supported SSD (Not included)】Support Max 9.5mm thickness 2.5 inch SATA HDD/SSD installation
【About WiFi Description】USB 3.0 high-speed transmission will interfere with the Raspberry Pi's 2.4G wifi signal. So please use Ethernet or WIFI 5G AP if you find the 2.4G signal is unstable. (Pls refer to WiKi X825#Document)
21,00 € SU AMAZON
Waveshare
Waveshare PCIe To 2-Ch SATA Adapter For Raspberry Pi 5, Supports SATA Hard Drive Protocol, Onboard Dual LED Indicators And EEPROM, HAT + Standard, Driver-Free, Plug And Play
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
PCIe TO 2-CH SATA HAT+: Designed For Raspberry Pi 5, Driver-Free, Plug And Play
Connecting To Pi 5 Via 16PIN Cable: Based On 16PIN PCIe Interface Of Raspberry Pi 5
SATA Hard Drive Protocol: Dual-Channel SATA Interfaces, Compliant With SATA Gen3 Standard
PCIe To 2-Ch High-Speed SATA 3.0: Compliant With SATA 3.0 (SATA Gen3) And PCIe Gen2 Standards
SATA Drive Slot Support. Onboard Dual LED Indicators: Easy To Monitor The Working Status. Onboard EEPROM: For Saving HAT ID And Product Information
26,99 € SU AMAZON
Geekworm
Geekworm NASPi V2.0 2.5 "SATA HDD/SSD NAS Storage Kit per Raspberry Pi 4 Modello B (Non includere Pi 4 o SSD/HDD)
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【NASPi V2.0 2.5" SATA Case】Used for raspberry pi 4 with a 2.5 inch SATA HDD/SSD. (Dual 2.5" SATA Board with Case refer to NASPi Gemini: ASIN B07VXF2HJG)
【Function】NAS Storage, Safe Shutdown, Auto Power On, PWM Fan
【Packing List】X823 storage shield *1, X-C1 V2.0 adapter board*1, 4010 PWM cooling fan with X823-A3 metal fan bracket*1, aluminum case*1
【How to Power】5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1), Recommend Geekworm 20W 5V 4A USB C power adapter (ASIN: B09J4V3RYK)
【Supported Hard Disk Thickness】NASPi supports SSD with a thickness Max. 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thick. HDD/SSD is not included
65,89 € SU AMAZON
Coolwell
PCIe to 2-Channel SATA HAT+ Adapter for Raspberry Pi 5, SATA 3.0 Expansion Board with Dual SATA Ports, LED Indicators, EEPROM, Plug and Play, High-Speed HDD/SSD Storage Support
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
✅ High-Speed PCIe to 2-Port SATA 3.0 Adapter for Raspberry Pi 5: This dual-channel PCIe to SATA HAT+ supports SATA 3.0 (6Gbps) for fast and stable HDD/SSD storage, specially designed for Raspberry Pi 5 via 16PIN PCIe interface.
🔌 Plug and Play SATA Expansion Board, Driver-Free Setup: No driver installation needed—this SATA HAT+ adapter is fully plug-and-play on Rasp-berry Pi 5, allowing for quick setup of external storage with zero hassle.
💡 Onboard Dual LED Indicators for Status Monitoring: Features two status LEDs for each SATA port, making it easy to monitor SATA HDD/SSD activity and system operation at a glance.
📦 Integrated EEPROM for HAT ID and Product Info Storage: The onboard EEPROM stores the HAT+ identity and technical details, ensuring compatibility with the Rasp-berry Pi HAT+ standard and auto-recognition on boot.
🛠️ Compact, Reliable SATA Expansion for Raspberry Pi NAS Projects; Perfect for building your own Rasp-berry Pi NAS, media server, or data backup system—this 2-Port SATA PCIe adapter is compact, efficient, and ideal for DIY storage solutions.
25,91 € SU AMAZON
Geekworm
Geekworm for Raspberry Pi 4, X862 V2.0 M.2 NGFF SATA SSD Storage Expansion Board with USB 3.1 Connector Support Key-B 2280 SSD
Spedizione gratuita
66
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Important Note】Pls format the new SSD before use.
【Raspberry Pi 4 NGFF SATA SSD Shield】X862 V2.0 Adapter supports M.2 NGFF SSD Key-B 2280 length for Raspberry Pi 4 8GB/4GB/2GB/1GB (NOT include Raspberry Pi board or SSD). UASP supported, NOT support TRIM
【How to Power】√ Model 1. power via Raspberry Pi 4: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK); √ Model 2. power via X735 if working the X735: USB-C 5V ≥3A (recommend 5V 4A 20W power adapter ASIN: B09J4V3RYK) OR 6-30V with DC 5521 Jack (recommend 12V 5A 60W power adapter ASIN: B0BD81W6SN)
【Allows booting OS from HDD/SSD 】Booting OS from your HDD/SSD for faster app opens, web serving and file copying, pls refer to: raspberrypiwiki (Does_the_X825/X855_support_USB_boot)
【Matching Metal Case(not included)】No matching case now. X857-C3 Case (ASIN: B08VJC5CD4) for X862 and Raspberry Pi 4 is out of stock and off-production.
31,00 € SU AMAZON
raspberry pi sata
raspberry pi 5 sata
sata raspberry pi 5
raspberry pi 4 sata
raspberry pi sata adapter
sata raspberry pi 4
raspberry pi shield sata
raspberry pi hat sata
raspberry pi sata hat
raspberry pi sata nas
#1 VINCITORE
