main logo

Raspberry Sim Module 5g

I 5 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 5 ottobre 2025
Waveshare
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • ✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
  • ✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
  • ✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
  • ✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
  • ✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
  • 50,99 € SU AMAZON
Waveshare
Waveshare
Waveshare USB TO M.2 B KEY Module Driver Board for M.2 Interface 4G/5G Module(NOT Included), With Quad Antennas,USB 3.1 Port for Raspberry Pi/PC/Jetson Nano to Achieve High Speed 5G Network
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Support 5G modules with M.2 (NGFF) Key B interface, compatible with SIMCom and Quectel 5G modules. Support 5G modules with 3042/3052 form factor, such as SIM82XX, and RM50XQ series 5G modules.
  • USB 3.1 Type A port for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed 5G network. 4x SMA antenna connectors, easy to install the antenna.
  • Onboard SIM card slot for NANO SIM card. Onboard power and network indicators, with multiple reserved pads, for checking module operating status and testing other functions.
  • PCB ENIG process, reserved multi slots and positioning holes for integration. Comes with customized aluminum alloy heatsink, good heat dissipation, nice-looking, protective and durable.
  • Just plug it into USB port, go through some simple configuration, the high speed 5G network connection will be ready to use.
  • 38,99 € SU AMAZON
EXVIST
EXVIST
EXVIST 5G LTE Industrial M.2 (NGFF) a USB3.0 Adattatore W/NANO SIM Card Slot Per Modulo 5G LTE Come Quectel RM500Q ecc Applicabile per M2M & IoT Applicazioni Come Raspberry Pi Router Industriale ecc.
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • Compatibilità: è compatibile con moduli 5G IOT NGFF (M.2) di alcune marche, come Quectel RM500Q, CNEE ecc.
  • Applicazione: può essere ampiamente utilizzato per applicazioni IoT M2M come router industriale, gateway domestico, STB, laptop industriale, laptop consumer, PDA industriale, tablet PC, videosorveglianza e segnaletica digitale, ecc.
  • Affidabilità: adotta il design del circuito elettrico industriale, il chip di alimentazione DC-DC e la corrente sincronizzata da 3,5 A per assicurarsi che il modulo possa funzionare sempre bene e mai offline anche in ambienti difficili.
  • Principio - La definizione di interfaccia di NGFF (M.2) è segnale USB e 3.7V, la tensione di ingresso 5V da USB sarà convertita in 3.7V tramite chip di alimentazione DC-DC per alimentare il modulo e UIM/scheda SIM.
  • Interfacce - Ci sono M.2 (NGFF) per il collegamento del modulo 5G IOT, connettore USB 3.0 che può essere compatibile con connettore USB3.0 e USB2.0, slot per schede SIM NANO (Push-Push Type) che supporta hot-plug ma non dual SIM.
  • 21,26 € SU AMAZON
Waveshare
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
Spedizione gratuita
star

89

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
  • Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
  • Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
  • Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
  • 30,99 € SU AMAZON
Sixfab
Sixfab
Kit modem 5G per Raspberry Pi 5                  
Spedizione gratuita
star

84

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Sixfab Cappello 5G progettato per Raspberry Pi 5 (Raspberry Pi 5 non è incluso)
  • Integrato Quectel RM502Q-AE 5G Sub-6Ghz
  • Antenna interna progettata Sixfab in attesa di brevetto per bande di frequenza Sub-6
  • Sixfab Connettore ponte USB 3.0
  • I driver recenti supportano Windows 10 e Linux (fare riferimento alle schede dati del modem)
  • 460,84 € SU AMAZON
raspberry sim module raspberry pi sim module raspberry 5g 5g module raspberry pi 5g