Raspberry Sim
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
14 dicembre 2025
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare GSM/GPRS HAT for Raspberry Pi 2B/3B/3B+/Zero/Zero W Jetson Nano Based on SIM800C Send Messages Connect to Wireless Internet Transfer Data
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano;Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32) Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Supports SMS, GPRS, DTMF, HTTP, FTP, MMS, email, etc.
Onboard voltage level translator, 3.3V by default, switch to 5V via jumper. 2x LEDs for indicating the module working status. SIM card slot for 1.8V/3V SIM card 2x LEDs for indicating the module working status.
Baudrate auto detection (1200bps ~115200bps). Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands) Baudrate auto detection (1200bps ~115200bps).
Supports SIM application toolkit: GSM 11.14 Release 99;UART interface, for connecting host control boards like Arduino/STM32 UART interface, for connecting host control boards like Arduino/STM32. Supports SIM application toolkit: GSM 11.14 Release 99.
20,14 € SU AMAZON
EBTOOLS1
3G 4G LTE a USB con scheda SIM, presa mini PCI E a clip, 3 Amp, per copertura UMTS / HSPA + e GSM / GPRS / EDGE, compatibile con modulo Raspberry Pi 4/3/2 / B +
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
Waveshare
Waveshare PCIe to M.2 4G/5G and USB 3.2 HAT, Compatible with Raspberry Pi 5 Cellular Modem and SIMCom/Quectel 4G/5G LTE Modules, Comes with 5G-4IN1-PCB Antenna, High-Speed Networking
90
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
✅Designed for Raspberry Pi 5, HAT+ standard design with onboard I2C EEPROM, and supports Raspberry Pi 40PIN GPIO stackable expansion. Extends 3x high-speed USB 3.2 Gen1 ports for connecting more peripherals
✅Onboard M.2(NGFF) Key B slot, supports SIM7600XX-M.2, SIM82XX and RM5XX series 4G/5G modules and is compatible with 3042/3052 packages. Onboard Type-C port for connecting to a PC for 4G/5G networking, debugging and firmware updating, or external power supply input
✅Onboard power monitoring chip for real-time measurement of voltage, current and power. Onboard SIM card slot for NANO-SIM card
✅Onboard Reset button, Power and Network indicators for easy debugging and monitoring the operating status. Comes with customized 5G-4IN1-PCB Antenna for neat wiring management, supports top or bottom installation. Reserved airflow vent and mounting holes for cooling fan to increase airflow and provide better heat dissipation
✅The 4G/5G module is NOT included, please purchase separately according to your needs. Comes with 5G-4IN1-PCB antenna by default, if you need an external 5G antenna for outdoor testing, you can choose 5G/4G/3G/2G External Antenna or 5G/4G/3G/GNSS External Antenna.
50,99 € SU AMAZON
Raspberry Pi
Raspberry Pi 4 Modello B (4GB)
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
SDRAM LPDDR4-3200 da 1 GB, 2 GB, 4 GB o 8 GB (a seconda del modello)
2,4 GHz e 5,0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE Gigabit Ethernet
2 porte USB 3.0; 2 porte USB 2.0.
Intestazione GPIO standard a 40 pin Raspberry Pi (completamente compatibile con le schede precedenti)
74,65 € SU AMAZON
Waveshare
Waveshare SIM7600G-H 4G HAT (B) for Raspberry Pi Supports LTE Cat-4 4G/3G/2G GNSS Positioning Global Band
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
4G HAT FOR RASPBERRY PI,Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning,Based on SIM7600G-H, Global Band
Suitable For Raspberry Pi / PC,Dedicated Pogo Pin For Connecting With Raspberry Pi Zero/Zero W Without Extra USB Cable General Purpose MicroUSB Connector For Other Raspberry Pi Boards Or PC
Global Band 4G / 3G / 2G Support,Up To 50Mbps Uplink And 150Mbps Downlink For 4G Network
USB HUB Feature,Onboard USB HUB Chip With USB2.0/1.1 Compliant, Providing 2x USB-A Connector And 1x USB Solder Pad
GNSS Positioning,Supports GPS, BeiDou, Glonass, LBS Base Station Positioning; Telephoto Call & SMS Support,Making Telephoto Call Or Sending SMS By AT Commands, With Onboard Audio Jack
96,99 € SU AMAZON
Coolwell
A7670E LTE Cat-1 HAT For Raspberry Pi, Multi Band Support, 2G GSM/GPRS, Enabling LTE Cat-1 / 2G Communication & LBS Positioning
79
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL; Supports dial-up, telephone call, SMS; Supports LBS base station positioning, it is able to get the approximate position info via mobile network
TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words;Breakout common used control pins of the A7670X module, make it easy to connect with hosts boards like Ardui/STM32
Onboard USB interface, for testing AT Commands, network communication, and so on; Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
SIM card slot, supports 1.8V/3V SIM card;2x LED indicators, easy to monitor the operating status;Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
38,30 € SU AMAZON
Risegun
Risegun Modulo gsm/GPRS SIM800C, Componenti elettronici del modulo della Scheda di Sviluppo con Antenna SMA per Modulo Sperimentale Raspberry Pi
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Funzioni di comunicazione versatili: Il modulo SIM800C GPRS-GSM supporta SMS, telefono, dati GPRS, protocolli HTTP, MMS, decodifica DTMF, Bluetooth e funzioni TTS. È ideale per un'ampia gamma di applicazioni IoT e di monitoraggio remoto e offre opzioni di comunicazione complete.
Gamma di alimentazione flessibile: Con un ampio intervallo di tensione compreso tra 5 V e 20 V e una potenza di uscita superiore a 2 A a 5 V, questa scheda di sviluppo SIM800C è ideale per progetti ad alto consumo energetico come le integrazioni Raspberry Pi.
Facile configurazione con plug-and-play: La scheda di sviluppo GSM GPRS è dotata di più interfacce, come pin da 2,54 mm, MICRO-USB e jack audio da 3,5 mm. Si connette automaticamente alle reti, facilitando la prototipazione e la configurazione sperimentale dei moduli.
Robusta idoneità industriale: Con un intervallo di funzionamento compreso tra -45 ℃ e 80 ℃, questa scheda SIM con modulo GPRS GSM è progettata per condizioni estreme.
Velocità di trasmissione adattiva e connettività universale: La velocità di trasmissione adattiva (2400-115200) del modulo SIM800C garantisce una comunicazione flessibile e compatibile.
15,29 € SU AMAZON
LUCKFOX
LUCKFOX 4G HAT for Raspberry Pi, Based on SIM7600E-H, Enabling LTE Cat-4 4G/3G/2G Communication & GNSS Positioning, Compatible With Raspberry Pi Series Boards/Jetson Nano
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Equipped with standard Pi 40PIN GPIO expansion head, and compatible with Raspberry Pi series boards/Jetson Nano. Support dialing, telephone calling, SMS/TCP/UDP/DTMF/HTTP/FTP, etc
Support GPS/BeiDou/Glonass/GALILEO/QZSS/LBS base station positioning. The onboard USB interface is used to test AT commands, obtain GPS positioning data, etc. On board 2102 USB to UART converter for serial debugging. Disconnect the UART control pin for connecting STM32 and other motherboards
SIM card slot, supporting 1.8V/3V SIM card. TF card slot, used to store files, messages and other data. Car audio jack and audio decoder for making calls. 2 LED indicators, easy to monitor operation status
On board voltage converter, the working voltage can be configured as 3.3V or 5V through jumpers. Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT command (3GPP TS 27.007, 27.005 and V.25TER command set)
Support SIM application kit: SAT Class 3, GSM 11.14 Release 99, USAT. Provide online development resources and manuals (examples for Raspberry Pi/Jetson Nano/STM32). Please ask 24-hour customer service for relevant manual
75,99 € SU AMAZON
Coolwell
Coolwell SIM7028 NB-IoT HAT for Raspberry Pi 4B+ 4B 3B+ 3B 2B+ Zero W WH 2W for Arduino Jetson Nano Supports Global Band NB-IoT Communication with GSM Antenna
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
NB-IoT HAT for Raspberry Pi, teste di prolunga standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi e Jetson Nano, ecc.
NB-IoT HAT for Jetson Nano, supporta TCP, UDP, LWM2M, COAP, DTLS, DNS, NTP, PING, HTTP(S), MQTT(S), TLS/SSL, ecc.; supporto per applicazioni SIM: SAT Class 3, GSM 11.11, USAT
NB-IoT HAT for Arduino, interfaccia di tipo C per il debug del software; pin di controllo UART Onboard, per il collegamento con schede host come Ardui/STM32
Da USB a chip UART, il pin di comunicazione UART può essere configurato tramite jumper; slot per scheda SIM nano integrata, compatibile con schede specifiche NB-IoT
Con risorse di sviluppo online e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/ESP32)
23,99 € SU AMAZON
#1 VINCITORE
