Raspberry Pi Shield
I 10 migliori prodotti di aprile 2025
Ultimo aggiornamento:
30 aprile 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54 mm (0.1 inch) pitch
Pin Name: The BCM numbering name of each pin is printed next to it
11,95 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 UPS X703, Ultra-compact 18650 UPS Shield with Auto Power On for Raspberry Pi 4 8GB/4GB/2GB Only
Spedizione gratuita
95
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
【Compatibility】UPS with auto power on and Max 5.1V 4A output for Raspberry Pi 4 Model B 8GB/4GB/2GB, can also stack with other Raspberry Pi accessory boards or 3.5 inch screen for enhanced applications. NOT support Raspberry Pi 3
【3A Fast Charging】Supports 3A fast charging via USB-C socket, add 4 test pins to achieve powered between X703 and Raspberry Pi 4 without additional cable
【Working time】Work with single 18650 Lithium Ion battery with up to 4 hours working time, integrated over current protection, over voltage protection and battery reverse connection protection
【Multiple Onboard Interfaces】Allows power input via Type-C socket or XH2.54 connector; On-board PH2.0 connector allows to connect external power switch
【How to power】5Vdc +/-5% , ≥3A (Via Type-C Port of X703), Recommend 5V 4A 20W power supply (ASIN: B09J4V3RYK)
【Note】DON'T supports software safe shutdown.
【Jumper Cap Description】√① If [CHG] pin is OPEN, battery charging will be started after powering on(short press the on-board button to turn on) and stopped after powering off(press and hold for 2-3 seconds to turn off). If [CHG] pin is SHORT, the battery will be automatically charged once your power adapter connected. The purpose of adding the [CHG] jumper is to extend the life cycle of the battery by reducing the number of recharges. √② If [PON] pin is SHORT, power always on, power button disabled; If [PON] pin is OPEN, press power button to turn on, and hold 3s to turn off.
28,89 € SU AMAZON
Geekworm
Geekworm X1200 5V UPS Shield for Raspberry Pi 5, with Max 5.1V 5A Output & Auto Power On & Safe Shutdown & Power Loss Detection Function
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】 for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB
【Function】X1200 provides max 5.1V 5000mA Power Backup, intelligent and safe power management like auto power on, safe shutdown, power loss and power adapter failure detection, on-board power button to power on/off
【Versatile Design】X1200 is designed to be attached on bottom and don't use the 40-pin header, enabling easy stacking with other Raspberry Pi accessory boards. This versatility allows you to expand the functionality of your Raspberry Pi and create enhanced applications tailored to your specific needs
【How to Power】Power via X1200 USB-C port: 5Vdc 5A via USB Type-C; (Recommended power adapter ASIN: B0CP8SRXSC)
【18650 Battery Reuirement】Battery length max 65.3mm, diameter max 18.5mm. NOTE: NOT include batteries!
【Packing List】 X1200 Expansion Board x 1, Screws Pack x 1 (Not include raspberry pi 5 motherboard, batteries or power adapter)
【Matching Case (NOT included)】Refer to X1200-C1 Case (ASIN: B0D4Z7NDNP)
52,89 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579-V2) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1000 / M901 / M300 / M400 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q; √ P579 Case with H501 active cooler, refer to ASIN: B0D5LCJQZ5
13,88 € SU AMAZON
ARCELI
ARCELI 16 canali PWM/Servo Driver Interfaccia IIC-PCA9685 per arduino o Raspberry pi shield module servo shield
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
È conforme a 5V, il che significa che è possibile controllarlo da un microcontrollore da 3,3 V e continuare a pilotare fino a 6 V in uscita (questo è utile quando si desidera controllare LED bianchi o blu con 3,4 + tensioni avanti)
6 pin di selezione indirizzo in modo da poter collegare fino a 62 di questi su un singolo bus i2c, per un totale di 992 uscite
PWM a frequenza regolabile fino a circa 1,6 KHz; Uscita push-pull o open-drain configurabileProduttore
Risoluzione a 12 bit per ciascuna uscita - per servi, che significa circa 4 secondi di risoluzione a 60 Hz di frequenza di aggiornamento
8,99 € SU AMAZON
Miuzei
Miuzei Custodia per Raspberry Pi 5 Support SSD PCIe M.2 NVMe Hat Key-M Shield Top X1001/X1000/X1003 Metal Case for Raspberry Pi 5 4GB/8GB with Official Active Cooler 5,1V 5A Alimentatore 27W Power
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Compatibilità: Miuzei MC72 Metal Case ① Support Raspberry Pi 5 con PCIe M.2 NVMe Shield TOP come: X1003 X1000 X1001 X1004 ② Supporta Raspberry Pi 5 8 GB/4 GB scheda madre ③ Supporto ufficiale Raspberry Pi 5 Active Cooler (incluso)
Design compatto: la copertura superiore della custodia in alluminio è realizzata in acrilico trasparente di alta qualità, che non solo previene efficacemente l'interferenza del segnale WiFi da parte dell'alloggiamento in metallo, ma rende anche chiaramente visibile lo stato di lavoro del Raspberry Pi 5; Allo stesso tempo, le aperture laterali aiutano a dissipare il calore più velocemente
Raffreddamento significativo: la custodia in alluminio Raspberry Pi 5 è realizzata in lega di alluminio di alta qualità per una protezione durevole, e il processo di placcatura rende la custodia lucida e testurizzata, e con il dispositivo di raffreddamento attivo, il Raspberry Pi 5 è in grado di correre ad alte velocità anche quando i dispositivi di espansione multipli sono utilizzati allo stesso tempo
Facile accesso a tutte le porte: il case Miuzei Raspberry Pi 5 offre un accesso preciso alla porta GPIO, micro HDMI, porta di alimentazione USB-C, presa Ethernet, slot per schede SD, pulsante di alimentazione, porta MIPI DSI/CSI e altro ancora
Contenuto della confezione: 1 custodia in metallo MC72 per Raspberry Pi 5 8 GB/4 GB, 1 adattatore USB-C da 5,1 V, 5 A, 27 W, 1 x Raspberry Pi 5 Original Active Cooler, 1 manuale utente (lingua italiana non garantita), 1 x 4 pezzi di gomma; 1 x Screws Pack Accessories Nota: non include Raspberry Pi 5 scheda madre, M.2 NVMe SSD ShShShe. ield, M.2 NVMe SSD
27,99 € SU AMAZON
Geekworm
Geekworm X306 V1.3 Ultra-thin UPS Shield for Raspberry Pi Zero 2 W
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
【Update】Updated to V1.3 in July 2024. 1. Only compatible with Raspberry Pi Zero 2W；2. Removed 3 standard USB-A 2.0 ports；3. Removed 4-pin header for external power switch and always-on power option; 4. Smaller size, simplified use
【Compatibility】Compatible with Raspberry Pi Zero 2 W ONLY
【Ultra-thin UPS】Ideal uninterruptible power supply (USP) solution for Raspberry Pi Zero W/2 W, max. 5.1 V, 4000 mA power backup with single cell battery holder
【How to Power】Power via USB-C 5V Power In port of X306; 5Vdc +/-5% , ≥3A; Recommended Geekworm 5V 4A 20W USB-C power supply(ASIN: B09J4V3RYK)
【How to cool】Recommended for use with C296 aluminium heat sink (ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W.
【Packing List】1 x X306 Expansion Board; 4 x M2.5x5mm Screws; Note: not inlcude Raspberry Pi board, battery, GPIO Header & power adapter.
28,89 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
73
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
16,39 € SU AMAZON
Freenove
Freenove Breakout Board for Raspberry Pi Pico 1 2 W H WH, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Compatible Models: Raspberry Pi Pico / Pico H / Pico W / Pico WH / Pico 2 / Pico 2 W (NOT included in this kit)
GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
Terminal Block and Header: Connect to all pins of Raspberry Pi Pico, 2.54 mm (0.1 inch) pitch
Pin Name: The name of each Pin is printed next to it
14,95 € SU AMAZON
raspberry pi midi shield
raspberry pi shield sata
raspberry pi
raspberry pi raspberry pi
raspberry-pi
raspberry shield
raspberry pi shield m2
raspberry pi 5 nvme shield
raspberry pi 5 ssd shield
raspberry pi rp2040
#1 VINCITORE
