Raspberry Pi 5 Screen Case
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
6 ottobre 2025
Freenove
Freenove Computer Case Kit for Raspberry Pi 5 (NOT Included), 128GB M.2 NVMe SSD 800 MB/s, 4.3 Inch Touchscreen, 5 MP Camera, OLED Screen, Stereo Speakers, 3.5 mm and Optical Audio (S/PDIF)
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Computer Case Kit: Integrated with M.2 NVMe PCIe SSD slot, 4.3 inch touchscreen (800 x 480 pixel, color IPS wide viewing angle, 5-point capacitive touch), 5 MP camera (2592 x 1944 pixels), 0.96 inch OLED screen (128 x 64 pixel, single-color), audio system, cooling system, programmable RGB lights, exposed interface and GPIO (Note: Compatible with Raspberry Pi 5 only, NOT included)
M.2 SSD Slot (128 GB SSD included): Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5) (The write speed of SSD is much faster than that of memory card)
Boot from SSD: SSD can be used as a system disk instead of just an regular disk, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Audio System: Built-in stereo speakers with on / off switch, plus 3.5 mm and optical (S/PDIF) audio outputs
Cooling System: An active cooler for Raspberry Pi, 2 fans for the case (Automatically start and stop based on temperature)
99,95 € SU AMAZON
KKSB Cases
KKSB - Custodia per display Raspberry Pi Display 2 con alloggiamento per Raspberry Pi 5
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Qualità durevole.
Custodia in metallo per Raspberry Pi 5 è inclusa.
35,00 € SU AMAZON
CUQI
CUQI Raspberry Pi Display da 3,5 Pollici con Alloggiamento Raspberry Pi 5, 480 x 320 TFT LCD 60 FPS con Mini Ventola e Dissipatore di Calore per Raspberry Pi
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Il touch screen da 3,5 pollici viene fornito con una custodia speciale per Raspberry Pi 5, in grado di ospitare sia il touch screen che il Raspberry Pi 5, ottenendo una perfetta combinazione di touch screen e Raspberry Pi 5.
Risoluzione 480 x 320, frequenza di aggiornamento 60 FPS per Raspberry Pi, supporta l'ingresso del segnale SPI da 125 MHz, display stabile senza sfarfallio. (Nota: il touchscreen da 3,5" è disponibile per Raspberry Pi 4 e Raspberry Pi 5, ma solo per Raspberry Pi 5.)
Vieni con mini ventola e dissipatore di calore, assicurati che il tuo Raspberry Pi 5 funzioni in modo stabile per ottenere la migliore dissipazione del calore, non devi preoccuparti della dissipazione del calore.
Compatibile con i sistemi Raspbain, Ubuntu, Kali e RetroPe, vengono forniti l'installazione gratuita dei driver e tutorial, si prega di leggere il manuale elettronico per i dettagli. Raspberry Pi 5 attualmente offre solo il sistema Raspbian, se si desidera installare un altro sistema, non esitate a contattarci.
La confezione include: touchscreen da 3,5 pollici, custodia per Raspberry Pi 5, penna, cacciavite, piedini in gomma, viti, montanti in metallo e mini ventola.
23,99 € SU AMAZON
Waveshare
Waveshare Official Case for Raspberry Pi Touch Display 2/7-DSI-TOUCH-A / 7inch DSI LCD (H), Support Raspberry Pi 5 / Raspberry Pi Expansion Boards, Abundant Interfaces (Not for Other 7" Screens)
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
High Compatibility with Raspberry Pi 5 & Official Raspberry Pi Touch Display 2 : Precisely designed mounting holes allow seamless installation of the Raspberry Pi 5 and the Official Raspberry Pi Touch Display 2 without modifications—quick, secure, and reliable (For compatible screens, only compatible with Raspberry Pi Touch Display 2 / Waveshare 7-DSI-TOUCH-A / Waveshare 7inch DSI LCD (H). Not for other 7-inch screens - please verify your model before purchase)
Ample Interface Reservations for Hassle-free Expansion: Thoughtfully arranged to fully accommodate GPIO, HDMI, power, and other common interfaces. Compatible with various Raspberry Pi expansion boards such as PoE HAT (F) / RS485 CAN HAT / 2-CH RS485 HAT to meet diverse project development needs
Injection Molding, Sturdy Structure: Utilizing high-precision injection molding technology, the shell is formed as a single piece, offering exceptional strength and accuracy. Resistant to deformation over long-term use, it adapts to various environmental demands
Stable Support & Flexible Expansion: Equipped with built-in metal nuts on the top, bottom, and back, it supports flexible attachment of external brackets or desktop/wall mounting (brackets not included), ensuring stable support and an optimal viewing angle
Sleek Industrial Design: Featuring a modern aesthetic with smooth lines and rounded edges, this design balances practicality and visual appeal. Suitable for diverse scenarios such as education, office work, and industrial control. Quick Installation & Easy Maintenance: The modular structural design enables rapid assembly and disassembly, facilitating the installation of heat sinks, cable connections, and replacement of expansion accessories, enhancing overall maintainability
16,99 € SU AMAZON
OneNineDesign
Raspberry Pi, Custodia per Touchscreen LCD
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
In stock & ready to Ship
20,70 € SU AMAZON
KKSB Cases
KKSB - Supporto per display Raspberry Pi Touch Display 2 – Alloggiamento in metallo per Raspberry Pi 5 incluso – La custodia offre spazio per cappelli e raffreddatori a basso profilo
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Custodia in metallo resistente.
Supporta Raspberry Pi HATs and Cooler.
36,00 € SU AMAZON
CHICHIYANG
CHICHIYANG 5 "Monitor LCD Display Portatile Stand Stand Display Display Case Display Screen Case 5 pollici per Raspberry Pi
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Realizzato in materiale di qualità, resistente e robusto, con un lungo tempo di servizio.
Realizzata in acrilico nero, questa custodia è robusta e resistente alle cadute e ha una lunga durata. Ha un supporto robusto per fornire un supporto stabile per evitare cadute.
La nostra pellicola protettiva per Raspberry Pi include accessori di montaggio, fori di montaggio riservati per una facile installazione.
Si abbina perfettamente al tuo schermo, migliorando la tua esperienza prolungando la vita del tuo dispositivo.
Squisita fattura, facile e conveniente per l'installazione, affidabile in uso.
14,54 € SU AMAZON
Waveshare
Waveshare 4.3 pollici DSI LCD Display per Raspberry Pi 4B, 800×480 IPS Schermo Monitor Capacitivo Touchscreen con Custodia, Supporta Raspbian/Ubuntu/Kali / WIN10 IoT
Spedizione gratuita
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
4.3inch capacitive touch display for Raspberry Pi 4B, IPS screen with protection case, 800x480 hardware resolution, wide angle, toughened glass panel
MIPI DSI interface, refresh rate up to 60Hz
Supports Raspbian, 5-points touch, driver free
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free
Supports Retropie, driver free
49,49 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
Spedizione gratuita
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q;
13,88 € SU AMAZON
ElectroCookie
ElectroCookie Mini PC Case per Raspberry Pi 5 con raffreddamento RGB attivo (nero opaco)
Spedizione gratuita
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Custodia in miniatura per Raspberry Pi 5, compatibile con schermi SSD NVMe M.2 con montaggio superiore
Goditi un facile accesso ai pin GPIO e rapidi scambi SSD con la porta laterale oscurata, che mostra anche l'illuminazione RGB interna per combinare stile e funzionalità.
Dotato di una ventola PWM illuminata RGB che si accende con l'alimentazione del sistema e regola automaticamente la velocità in base alla temperatura della CPU (*Nota: l'illuminazione non è programmabile e la ventola potrebbe non girare quando la CPU è fredda, o può funzionare continuamente se non è disponibile alcun sistema operativo o unità avviabile per controllarla. ).
Accendi o spegne facilmente il tuo Raspberry Pi 5 dall'esterno della custodia utilizzando il comodo pulsante di accensione laterale, direttamente collegato al pulsante di accensione del Raspberry Pi 5.
Crea una custodia unica personalizzando i pannelli frontali; il telaio è progettato per supportare vari materiali come 1/16–1/8 "(1,6–3 mm) acrilico, legno e scheda PCB per uno stile personalizzato.
26,99 € SU AMAZON
raspberry pi 5 touch screen case
raspberry pi screen case
case raspberry pi 5
raspberry case pi 5
raspberry pi 4b case screen
raspberry pi 5 case
raspberry pi 5 screen
screen raspberry pi 5
raspberry pi touch screen case
flirc raspberry pi 5 case