Nvme Raspberry Pi 3
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
17 giugno 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
GeeekPi
GeeekPi Armor Case with CN01 M.2 M-Key PCIe 3.0 x1 Expansion Board Adapter for Raspberry Pi 5
Spedizione gratuita
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
CN01 M.2 M-key PCIe 3.0 x1 Espansione Board per Raspberry Pi 5: supporti M.2 NVMe SSDs in 2230, 2242, 2260, and 2280 form factors; Provides a direct PCIe interface for high-speed data transfer; Utizes an FPC (Flexible Printed Circuit) cable for a Secure and flexible connection ection to the Raspberry Pi 5's PCIe slot
Raspberry Pi 5 Armor Case: Custom-designed for the Raspberry Pi 5; ensuring a snug fit and comprehensive protection
Soluzioni di raffreddamento avanzate: include un pad termico di alta qualità per la dissipazione del calore efficiente dall'SSD; The aluminum heatsink on the expansion board aids in maintaining optimale operating temperatures
Easy Installation: Simple plug-and-play setup with clear instructions for hassle-free installation; Designed for user-friendly assembly, even for those with limited technical expertise
Prestazioni Improvement: The ability to boot from the SSD significantly reduces startup times and enhances overall system performance
29,99 € SU AMAZON
GeeekPi
GeeekPi N04 M.2 M-Key NVMe SSD Shield for Raspberry Pi 5, M.2 2280 PCIe to NVMe SSD Shield Pip PCIe Peripheral Board Top for Raspberry Pi 5 4GB/8GB (SSD and Pi5 Board are Not Included)
Spedizione gratuita
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
N04 M.2 NVMe to PCIe Adapter is designed for the latest Raspberry Pi 5. It support the installation of NVMe (M-key) drives in M.2 format sizes 2230, 2242, 2260 and 2280. Extra personalizzato CNC SSD mount screw, no soldering required.
PCIe x1 interfaccia in both Gen2 & Gen3 standard. The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0.
Ventilation hole design provides excellent ventilation airflow pour cooling; Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.
Comes with a FPC PCIe ribbon, M2 and M2.5 screws, spacers, and extra custom CNC SSD mount screw.
【Matching Case (NOT included)】 Case in metallo per N04 e Raspberry Pi 5, refer to ASIN: B0CMZG29LG; Case in alluminio per N04 & Raspberry Pi 5, refer to ASIN: B0CMZCG8P7
19,99 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
Spedizione gratuita
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
25,95 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Raspberry Pi
Raspberry Pi 5 8GB Quad-Core ARMA76 (64 Bits - 2,4 GHz)
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Processore quad-core ARMA76 (64 bit - 2,4 GHz) °GPU VideoCore VII 800 MHz integrata °Prestazioni da 2 a 3 volte superiori rispetto alla versione 4
Resa grafica notevolmente migliorata ° Micro-SD ad alta velocità ° Visualizza 2x 4K-60 fps contemporaneamente
2x USB 3.0 5GBps ° 2 connettori MIPI DSI/CSI a 4 vie
Nuove caratteristiche : ¤ Tasto ON/OFF ¤ Porta PCIe 2.0 ¤ Connettore RTC integrato
Modifica : ^ Alimentazione CC 5 V/5 A tramite USB-C ^ Ventola altamente raccomandata per Pi5"
94,88 € SU AMAZON
Freenove
Freenove M.2 NVMe SSD Adapter for Raspberry Pi 5, M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 3.0, 1231MB/s
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Big Upgrade -> Boost your system to an amazing speed by upgrading memory card (104MB/s max) to SSD (PCIe 2.0: 500MB/s max, PCIe 3.0: 1231MB/s max). (Note: Usually unable to reach maximum speed due to various limitations.) (Note: Raspberry Pi states that PCIe 3.0 may be unstable.)
Compatible SSDs -> M.2 NVMe SSDs are compatible, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280. (Note: NOT compatible with M.2 SATA SSDs.)
Two Uses -> Used as system disk or regular hard drive. Provide detailed tutorial. (Download needed, no paper tutorial.)
Easy to Use -> Just tighten the screws and connect the ribbon cable. (Simple configuration needed, see tutorial.)
Compatible models -> Raspberry Pi 5 only. (Note: NOT compatible with any other Raspberry Pi models.)
16,86 € SU AMAZON
GeeekPi
GeeekPi Argon One V3 M.2 NVME PCIE Custodia per Raspberry Pi 5
Spedizione gratuita
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【Raspberry Pi 5 Case NVMe】Included the Argon ONE V3 M.2 NVME PCIE Expansion Board,Compatible with Raspberry Pi 5 & M.2 NVMe SSD 2230 / 2242 / 2260 / 2280 for fast M.2 NVME storage.
【Both passive and active cooling】Durevole and Functional Aluminum Case Material for Passive Cooling, with built in Blower type 30mm PWM Programmable fan active cooler to efficiently cool your Raspberry Pi 5.
【Internal MicroController for Power Button and FAN Control Functions】Powered by Raspberry Pi RP2040 Chip. Nuovo Hacker Friendly caratteristica.
【Built-in IR Receiver】(GPIO 23) Works with Argon Remote once Argon Script is installed,but is fully user Programmable for other remotes in LIRC.
【Multi Function Power Button and Power Management】 Safe shutdown with power cut, Reboot, Always ON Mode.
【2 Full Size HDMI & GPIO Access】Converted the micro HDMl of the RPi 5 to Regular HDMI, and Full GPlO Access to Raspberry Pi 5 by Remove the Magnetic cover.
65,99 € SU AMAZON
Raspberry Pi
Raspberry Pi 5 Case Bianco/Rosso
14% Sconto
Spedizione gratuita
70
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Design a incastro, non richiede attrezzi
Offre accesso a tutte le principali porte e pin GPIO
Accesso al pulsante di accensione con visibilità LED per attività
Ventola PWM inclusa con connettore ventola Pi5
Dissipatori di calore inclusi
15,38 € SU AMAZON
nvme raspberry pi
raspberry pi nvme
raspberry pi 3
raspberry pi 3 3
raspberry pi 3+
raspberry pi 3 ups
ups raspberry pi 3
batteria raspberry pi 3
raspberry pi 3 2gb
raspberry pi 3 4gb
#1 VINCITORE
