Nvme Drive Hat
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
24 dicembre 2025
Waveshare
Waveshare PCIe to 2-CH M.2 HAT+ Adapter Type B Compatible with Raspberry Pi 5, Support 2280/2260 / 2242/2230 Size NVMe Protocol M.2 SS Solid State Drive High-Speed Reading/Writing NVMe HAT
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
PCIe To 2-Ch M.2 Adapter Type B For Raspberry Pi 5, Compatible With 2280 / 2260 / 2242 / 2230 Size NVMe Protocol M.2 Solid State Drive , 5Gbps Data Rate, High-Speed Reading/Writing, Raspberry Pi 5 NVMe HAT.Adopts Anti-Oxidation Immersion Gold Process
✅【Connecting To PI5 Via 16PIN Cable】Based On 16PIN PCIe Interface Of Raspberry Pi 5
✅【Dual NVMe Solid State Drives Support】Compatible With 2280 / 2260 / 2242 / 2230 Size M.2 Solid State Drives Supports PCIE X1 Gen2 Only, Supports Booting PI5 From Solid State Drive
✅【NVMe Drive Slot Support】Note: Only supports the NVMe Protocol Solid State Drives.
✅【Improves Reading/Writing Speed Of Your Pi】Faster Reading/Writing Speed Compared To The TF Card Slot Of Raspberry Pi , Greatly Improving Reading/Writing Efficiency Of The System Or Files, Supports Booting Pi5 From NVME Solid State Drive.(As Raspberry Pi does not support booting from NVME by default, you need to modify it to realize it.)
✅【Onboard Dual LED Indicators】Easy To Monitor The Working Status. 【Onboard Power Monitoring Chip And EEPROM】Real-Time Monitoring Of Solid State Drive Power Status For More Stable Operation
❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
27,99 € SU AMAZON
Waveshare
Waveshare NVMe PCIe To M.2 HAT+ Adapter with PoE, Compatible with Raspberry Pi 5, Supports NVMe Drive Protocol 2230/2242 M.2 Solid State Drive and 802.3af/at Network Standard, with Cooling Fan
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 with PoE HAT,designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard. Adapter for NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing.
Improves reading/writing speed of your Pi. Note: Only supports the NVMe Protocol Solid State Drives.
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Onboard Dual LED Indicators,easy to monitor the Working Status. Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive.
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power). be able to power extra devices while providing stable power to Raspberry Pi.
️Rich WiKi Resources️ We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
Waveshare
PCIe a M.2 Adattatore NVMe HAT per Raspberry Pi 5, Supporto NVMe Protocollo M.2 Solid State Drive 2230/2242, Supporta Modalità Gen2 e Gen3, Supporto Dell'avvio di PI5 da SSD
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
PCIe to M.2 mini adapter designed for Raspberry Pi 5, support NVMe protocol and M.2 solid state drive protocol, high-speed read/write, with high work efficiency
NVMe Drive Protocol support, compatible with 2230/2242 size M.2 Solid State Drive, supports Gen2 and Gen3 modes, supports booting PI5 from Solid State Drive
Connecting to PI5 via 16PIN cable, based on 16PIN PCIe interface of Raspberry Pi 5
Compact size design, practical and compact, easily embedded into your projects
Onboard working indicator lights, with PWR on continuously when powered, and ACT blinking during read/write
13,43 € SU AMAZON
Waveshare
PCIe To M.2 Mini Adapter Board Compatible with Raspberry Pi 5,Supports NVMe Protocol 2230/2242 Size M.2 Solid State Drive,for Raspberry Pi 5 NVMe HAT
92
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
PCIe To M.2 Mini Adapter only Compatible with Raspberry Pi 5
Support NVMe protocol and M.2 solid state drive protocol, high-speed read/write, with high work efficiency.
Support PCI-E×1 Gen2 or Gen3 modes.
Compatible with M.2 solid state drive of 2230/2242 sizes.
Onboard working indicator lights, with PWR on continuously when powered, and ACT blinking during read/write.
12,49 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 Adapter with PoE Function HAT+ (B), Compatible with Raspberry Pi 5, Supports POE NVMe Drive Protocol 2230/2242 / 2260/2280 M.2 Solid State Drive, High-Speed Reading/Writing
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Based on 16PIN PCIe Interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
Compatible With 2230 / 2242 / 2260 / 2280 Size M.2 Solid State Drive, Supports Gen2 and Gen3 Modes, Supports Booting PI5 From Solid State Drive
Providing both network connection and power supply for your Raspberry Pi in one cable
5V header provides up to 4.5A output (MAX 25W for 12V+5V total output power), be able to power extra devices while providing stable power to Raspberry Pi
Rich WiKi Resources: We provide official Wiki resources, please contact us for more information.
35,99 € SU AMAZON
Freenove
Freenove Dual M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 2 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Dual M.2 Slots: Install 1 or 2 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module can operate both when installed alone and together with an SSD on dual-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
19,95 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (with 128GB SSD), M.2 HAT Add-on Board, Solid State Drive, PCIe 2.0/3.0, Tested Speed 800 MB/s
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (usually read: 100 MB/s, write: 10 MB/s) to SSD (PCIe 2.0: read: 419 MB/s, write: 253 MB/s; PCIe 3.0: read: 804 MB/s, write: 404 MB/s. Tested with this SSD on Raspberry Pi 5)
Comes with 128GB SSD: M.2 interface, NVMe protocol, PCIe 2.0 or 3.0, size 2280 (The write speed of SSD is much faster than that of memory card)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
29,95 € SU AMAZON
TUOPUONE
TUOPUONE Raspb Pi M.2 HAT+ compatto, progettato per Raspb Pi 5, HAT+ Standard, supporta NVMe Protocol M.2 Solid State Drive con fattore di forma 2230, adatto per l'uso con la custodia Raspb Pi
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
upport interfaccia PCIe 2.0 a corsia singola (velocità di trasferimento di picco di 500 MB/s)
Supporta dispositivi che utilizzano il connettore M.2 M Key Edge, supporta solo unità SSD M.2 con fattore di forma 2230
Conforme alle specifiche Raspb Pi HAT+ ed è rilevato automaticamente dal più recente software Raspb Pi / firmware
Layout compatto, può essere montato all'interno della custodia ufficiale Raspb Pi 5, consentendo allo stesso tempo spazio per la ventola di raffreddamento integrata della custodia
Specificamente progettato per impilare con la ventola integrata nel case ufficiale Raspb Pi 5
35,99 € SU AMAZON
Waveshare
Waveshare PCIe to M.2 HAT Package A, Compatible with Raspberry Pi 5, High-Speed Reading/Writing, HAT + Standard, Supports NVMe Protocol M.2 Solid State Drive, Comes with a Pi5 Cooler
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Adapter For NVMe Protocol M.2 Solid State Drive, High-Speed Reading/Writing
Comes With Official 16PIN PCIe Cable For Connecting The HAT To PI5
Compatible With 2230/2242 Size M.2 Solid State Drive. Supports Gen2 And Gen3 Modes, Supports Booting PI5 From Solid State Drive
Onboard operation indicator, PWR indicator is always on when power on; ACT indicator blinking while reading/writing, easy to learn its operation status.
Images for reference only, the Solid State Drive, Raspberry Pi 5 and TF card are NOT included, please refer to the Package Content for detailed part list
28,99 € SU AMAZON
Freenove
Freenove Quad M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 4 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
65
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Quad M.2 Slots: Install 1 to 4 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module operates only when installed alone and NOT with any SSD on quad-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
29,95 € SU AMAZON
#1 VINCITORE
