Nvme Base For Raspberry Pi 5
I 10 migliori prodotti di dicembre 2025
Ultimo aggiornamento:
14 dicembre 2025
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75 / B0CZCZF2QV / B0CP8SRXSC)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
Geekworm
Geekworm X1002 M.2 NVMe SSD PIP PCIe Peripheral Board Bottom Base for Raspberry Pi 5
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1002#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1002 via FFC PCIe ribbon. And 2pcs pogo pins to supplementary power during large data transfer. Recommend to use Geekworm PD 27W power adapter (ASIN: B0FGPSRQ75)
【Packing List】1 x X1002 Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P580 Case (ASIN: B0D99HVX3C)
【Cooling Solution (NOT included)】Support Raspberry Pi 5 Active Cooler installation, or Geekworm H505 Active Cooler (ASIN: B0D44Y95GW), H509 Passive Cooler (ASIN: B0DDPWYLY1), Argon THRML 30mm Active Cooler (ASIN: B0CSJQC7DV)
【UPS Solution (NOT included)】Support work with X728 UPS (ASIN: B087J7WTYM), but there is no case for X1002 and X728
18,00 € SU AMAZON
Freenove
Freenove M.2 NVMe Adapter V2 for Raspberry Pi 5 (without SSD), M.2 HAT Add-on Board, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0/3.0, Max Speed 1231 MB/s
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max, PCIe 3.0: 1231 MB/s max) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Compatible SSDs: M.2 NVMe SSDs, PCIe 2.0 or 3.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs)
Two Uses: Used as system disk or regular hard drive, provide detailed tutorial (The download link can be found on the product box) (No paper tutorial)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Simple configuration needed, please refer to tutorial)
Compatible Models: Raspberry Pi 5 only (Note: NOT compatible with any other models)
9,95 € SU AMAZON
Geekworm
Geekworm X1004 Dual M.2 NVMe SSD Shield PCIe Peripheral Board for Raspberry Pi 5
89
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Support Dual M2 SSD】Compatible with M.2 KEY-M NVMe SSD 2280 (NOT included)
【How to Power】5Vdc +/-5%, 5A via Raspberry Pi 5. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC); or GaN PD 27W power supply (ASIN: B0CZCZF2QV)
【Support NVMe Boot】X1004 now supports NVMe boot with the latest eeprom (2024/05/17 version)
【Packing List】1 x X1004 PCIe to M2 NVMe Shield, 1x Accessories Pack
【Matching Case (NOT included)】Refer to P579-V2 Case (ASIN: B0CRB3DT5M), or P579-V2 Case with active cooler (ASIN: B0CT4P893Q)
【Note】Since X1004 is using ASMedia ASM1182e PCIe switch, it can't support PCIe Gen 3 speed, so even though we forced to turn on PCIe Gen 3.0 setting in Raspberry Pi 5, it is limited by ASMedia ASM1182e PCIe switch. speed is still PCIe Gen 2.0 speed.
40,80 € SU AMAZON
Freenove
Freenove Quad M.2 NVMe SSD HAT for Raspberry Pi 5, M.2 Adapter AI HAT 4 Slots NAS RAID Kit, Solid State Drive Size 2230 2242 2260 2280, PCIe 2.0 Max Speed 500 MB/s, Detailed Tutorial
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Big Upgrade: Boost your system to an amazing speed by upgrading memory card (SDR104: 104 MB/s max) to SSD (PCIe 2.0: 500 MB/s max) (The write speed of SSD is much faster than that of memory card) (Note: The max speed is declared by the Raspberry Pi documentation, usually unable to achieve)
Quad M.2 Slots: Install 1 to 4 SSDs, used as system disk, regular hard drive or bulid a NAS / RAID. Provide detailed tutorial for Raspberry Pi OS (The tutorial link can be found on the product box, no paper tutorial)
AI Accelerator: Compatible with M.2 Hailo AI accelerator module, so you can integrate high-performance AI (AI module operates only when installed alone and NOT with any SSD on quad-slot adapter)
Easy to Use: Just tighten the screws and connect the ribbon cable to install it on the top or bottom (Some SSDs may require connecting the power cable)
Compatible SSDs: M.2 NVMe SSDs, compatible with PCIe 2.0, size 2230 / 2242 / 2260 / 2280 (Note: NOT compatible with M.2 SATA SSDs) (This adapter can be shortened to be shorter than Raspberry Pi, but will not be able to install 2280 size)
29,95 € SU AMAZON
GeeekPi
GeeekPi Alloggiamento in metallo con scheda periferica N07 M.2 NVMe SSD Pip PCIe per Raspberry Pi 5, supporto M.2 Key-M NVMe SSD 2230/2242/2260/2280
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Compatibilità: questo kit include una custodia in metallo e una scheda periferica N07 M.2 PCIe a NVMe Bottom SSD Pip PCIe. È compatibile con il più recente Raspberry Pi 5 4 GB/8 GB e supporta M.2 NVMe SSD 2230 2242 2260 2280. La custodia in metallo è compatibile anche con la base X1002 o Pimoroni NVMe.
Facile accesso a Pi 5: la custodia in metallo GeeekPi N07 può facilmente accedere al jack di alimentazione Raspberry Pi 5 USB-C, porte micro HDMI, porte USB, Ethernet jack, slot per schede SD, pulsante di alimentazione, ecc.
【Raspberry Pi 5 Active Cooler Supported (NOT included)】 Supporta l'installazione di raffreddamento attiva Raspberry Pi 5, insieme con fori di raffreddamento ben fatti per garantire una dissipazione efficiente del calore. Con Active Cooler Kit, ASIN: B0DFLVP88L
Contenuto della confezione: 1 custodia in metallo per Raspberry Pi 5, 1 scheda periferica PCIe N07 PCIe M.2 Key-M NVMe SSD, 2 cavi FPC, 1 cacciavite, 1 confezione di viti
Nota: non include Raspberry Pi 5 board, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, o adattatore di alimentazione.
29,99 € SU AMAZON
Geekworm
Geekworm P580-V2 Case | Support Raspberry Pi 5 & X1005 / X1002 PCIe to M2 NVMe SSD Base & Active Cooler
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Per Raspberry Pi 5 con PCIe a Dual M.2 NVMe Shield Base X1005 (ASIN: B0D89MZTCY); ② per Raspberry Pi 5 con PCIe to M.2 NVMe Shield Base X1002 (ASIN: B0CQXPCNZK)
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supporta l'installazione di raffreddamento attiva Raspberry Pi 5, insieme con fori di raffreddamento ben realizzati per garantire una dissipazione efficiente del calore
Facile accesso a Pi 5: la custodia P580-V2 Raspberry Pi 5 può facilmente accedere al jack di alimentazione Raspberry Pi 5 USB-C, porte micro HDMI, porte USB, Ethernet jack, slot per schede SD, pulsante di alimentazione, ecc.
Contenuto della confezione: 1 custodia in metallo P580-V2, 1 4 cuscinetti in gomma; 1 confezione di viti
Nota: non include la scheda madre Raspberry Pi 5, X1002/X1005 PIP Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, o adattatore di alimentazione. !
14,00 € SU AMAZON
GeeekPi
GeeekPi N21 Dual 2280 NVMe Base per Raspberry Pi 5
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Compatibilità: GeeekPi N21 Dual NVMe SSD Shield Bottom compatibile solo con Raspberry Pi 5
Supporto Dual M.2 NVMe SSD con lunghezza multipla: supporto M.2 M-Key NVMe SSD 2230/2242/2260/2280 lunghezza installazione. Viene fornito con pilastro SSD in rame per l'installazione SSD 2230/2242/2260
Raspberry Pi 5 AI Hat Extension: supporta il modulo di accelerazione AI Hailo costruito attorno al chip Hailo-8L del Raspberry Pi AI Kit
Supporto avvio NVMe: supporta avvio NVMe con eeprom 2024/05/17 e versioni successive
Modalità di alimentazione: 5 Vdc +/-5% di potenza tramite pin header GPIO e FFC, convertito a 3,3 V max 3 A per alimentare l'SSD; si consiglia di utilizzare l'adattatore di alimentazione GeeekPi PD 27 W (ASIN: B0CQ1Q18HX)
34,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 5 Case (P579) | Support PCIe M.2 NVMe SSD Shield Top X1001 / X1004 / X1003 / X1012 / X1015 / X1000 / M901 / M300 & Raspberry Pi 5 Active Cooler
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
【for use with】① for Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN: B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), X1000 (ASIN: B0CQ4NTZ7G), M901(ASIN; B0D179YJ9K), M300 (ASIN: B0CSYPTWQD) ②for separate Raspberry Pi 5 16GB / 8GB / 4GB Motherboard
【Raspberry Pi 5 Active Cooler Supported (NOT included)】Supports Raspberry Pi 5 active cooler installation, together with beautifully crafted cooling holes to ensures efficient heat dissipation
【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button,etc.
【Packing List】1 x P579 metal case, 1x 4pcs Rubber Pads; 1x Screws Pack Accessories
【NOTE】NOT include Raspberry Pi 5 motherboard, X1000/X1001 M.2 NVMe SSD Shield, M.2 NVMe SSD, Raspberry Pi 5 Active Cooler, or power adapter!!!
√ P579 Case with Official Raspberry Pi 5 official active cooler, refer to ASIN: B0CT4P893Q;
13,88 € SU AMAZON
KEYESTUDIO
KEYESTUDIO 5PCIE-M.2NVME SSD Shield per Raspberry Pi 5 (Pi5 Non Sono Incluse)
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is an NVME M2 SSD PIP (PCIe Peripheral Board) for Raspberry Pi 5, which uses the new PCIE interface of Raspberry Pi 5 to connect NVME M2 SSD for fast data transfer and ultra-fast start up.
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield Supports：2230 / 2242 / 2260 / 2280 NVMe M2 SSD
KEYESTUDIO Raspberry Pi 5 PCIE-M.2 NVME SSD Shield is only compatible with M.2 NVMe SSD. It is not compatible with M.2 SATA SSD, M.2 PCIe AHCI SSD or other M.2 non-NVMe devices.
For more details about SN550, refer to it：New rpi-eeprom-update 2024-01-24 WD Blue SN550 nvme works now.
Toturiali link-https://bit.ly/4eSOPE7
9,55 € SU AMAZON
#1 VINCITORE
