Micro Swiss Flowtech Nozzle
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
18 giugno 2025
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Spedizione gratuita
98
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
74,99 € SU AMAZON
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
97
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.4mm
Spedizione gratuita
94
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Plated with Non-stick Composite Additive TwinClad XT Plating
The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
The FlowTech CHT nozzle is compatible with all FlowTech hotend models
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
19,99 € SU AMAZON
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.6mm
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
19,99 € SU AMAZON
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.6mm
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.8mm
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
26,99 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 0.6mm
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Plated with Non-stick Composite Additive TwinClad XT Plating
The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
The FlowTech CHT nozzle is compatible with all FlowTech hotend models
32,10 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality Ender 3 V3 KE
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
74,99 € SU AMAZON
Micro-Swiss
Micro Swiss FlowTech™ High Flow CHT Nozzle - 1.0mm
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Microswiss and Bondtech have partnered to bring the High Flow nozzle to the FlowTech ecosystem. This new nozzle incorporates proprietary CHT technology, specifically designed to enhance the filament flow rate.
Plated with Non-stick Composite Additive TwinClad XT Plating
The FlowTech nozzle, equipped with Bondtech CHT technology, can achieve a maximum volumetric flow rate of up to 50 mm³/sec.
More uniform layer deposition is achieved by splitting the filament flow into multiple chambers as it passes through the melt zone. This reduces gaps and weak points between layers.
The FlowTech CHT nozzle is compatible with all FlowTech hotend models
26,99 € SU AMAZON
micro swiss flowtech
micro swiss nozzle
flowtech nozzle
micro swiss ender 3 nozzle
#1 VINCITORE
