main logo

K1 Micro Swiss

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 8 ottobre 2025
Micro-Swiss
Micro-Swiss
Micro Swiss FlowTech™ Hotend for Creality K1 / K1 Max
Spedizione gratuita
star

99

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • The FlowTech Hotend is a new generation hotend line from Micro Swiss. Its unique design eliminates common hotend issues such as leaking nozzle seal and complex nozzle swaps.
  • Leak-Proof Nozzle: Tired of messy nozzle leaks that ruin your prints and waste filament? FlowTech Hotend combines nozzle and thermal break into one permanently sealed assembly that ensures a leak-proof hotend.
  • Cold Nozzle Change: Swapping out nozzles used to be a time-consuming and potentially hazardous task. With a FlowTech Hotend, nozzle changes are effortless, and there's no need for hot tightening, and you can do it with just one hand.
  • High-Flow Characteristics: Ceramic cylindrical heater and 28.6mm melt zone provides excellent volumetric flow rate.
  • All-Metal Design: Built to last! FlowTech hotend features an all-metal design that can handle most modern 3D printing filaments. The entire hotend is machined and assembled in-house, with quality control performed at multiple stages during the manufacturing process. At the end, each hotend undergoes a full thermal cycling test before it is packaged.
  • 76,88 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ Resistant Nozzle for FlowTech™ Hotend - 0.4mm
24% Sconto Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating.
  • This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 20,49 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.6mm
Spedizione gratuita
star

94

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.8mm
Spedizione gratuita
star

90

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 11,71 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro-Swiss M2714 Bowden Dual Gear Extruder Compatibile con Creality Ender, CR10, CR-10 PRO, CR-10S, CR6-SE, Tornado
Spedizione gratuita
star

86

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • Si adatta: macchine per estrusore Bowden, adatto per motori passo a passo di dimensioni NEMA 17
  • Prodotto negli Stati Uniti da Micro Swiss
  • 55,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for Creality K1, K1 Max, CR-M4-0.4mm
Spedizione gratuita
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#6

  • The nozzle is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE co-deposit. The TwinClad XT coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
  • 18,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ - HighFlow 1.75 Nozzle - 0.4mm  
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,99 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss CM2™ - MK8 Nozzle - 0.6mm            
Spedizione gratuita
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Micro Swiss CM2 Nozzle is an ideal nozzle for all applications. Core of the nozzle is made of high-temperature Copper Chromium Zirconium and plated with an Electroless Nickel Plating. This special alloy retains its strength at much higher temperatures compared to a regular copper alloy. The tip of the nozzle is made of M2 Hardened High Speed Steel and coated with a special nonstick nano coating.
  • 26,48 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech Hotend - 0,30 mm
Spedizione gratuita
star

73

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • L'ugello FlowTech è progettato per essere a prova di perdite e offre un processo di sostituzione rapido e rapido.
  • Il design FlowTech integra senza problemi il tubo termico con l'ugello, risolvendo efficacemente le sfide più prevalenti encountered con hotends convenzionali: perdite di ugelli e controindicazioni.
  • Micro Swiss FlowTech Hotend for Creality K1 / K1 Max
  • 22,18 € SU AMAZON
Micro-Swiss
Micro-Swiss
Micro Swiss Brass Plated Wear Resistant Nozzle for FlowTech™ Hotend - 0.4mm
Spedizione gratuita
star

70

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • The FlowTech nozzle is designed to be a leak proof and offers an effortless and quick nozzle replacement process.
  • FlowTech design seamlessly integrates the thermal tube with the nozzle, effectively resolving the most prevalent challenges encountered with conventional hotends: nozzle leaks and nozzle replacement inconvenience.
  • 20,49 € SU AMAZON
micro swiss k1 micro swiss micro swiss creality k1 hotend micro swiss bowden micro swiss mk10