Heatsink With Fan
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
5 ottobre 2025
GeeekPi
GeeekPi Raspberry Pi Ventola di Raffreddamento 30 x 30 x 7 mm con dissipatore per Raspberry Pi 3/2 Model B, Raspberry Pi 4B,3B + e Retroflag Nespi Case Plus (4-Pack)
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Utilizzato per Raspberry Pi 4,Pi 3, Pi 2, Pi Model B + e Retroflag NESPI CASE PLUS
La ventola di raffreddamento DC 5V funziona in modo fluido e silenzioso ed è ideale per la dissipazione del calore di Raspberry Pi. Può essere montato facilmente con le viti
I dissipatori di calore in alluminio hanno un nastro adesivo termoconduttivo sul retro.
La confezione include: 4x ventola di raffreddamento, 4x set di viti, 12x Dissipatori di calore per raspberry pi Pi 3B + / 3B / 2B / B + , 16x Dissipatori di calore per raspberry pi 4 Modello B
NOTA: Raspberry Pi non incluso
13,99 € SU AMAZON
GeeekPi
GeeekPi ICE Tower Cooler for Raspberry Pi 5, Raspberry Pi 5 RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 5 4GB/8GB
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
GeeekPi ICE Tower Cooler for Raspberry Pi 5, Raspberry Pi 5 RGB Cooling Fan with Raspberry Pi Heatsink for Raspberry Pi 5 4GB/8GB
17,99 € SU AMAZON
Waveshare
Waveshare Active Cooler (B), Compatible with Raspberry Pi 5, Active Cooling Fan, Aluminium Heatsink, with Thermal Pads
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
5V DC (supplied via four-pin fan header on Raspberry Pi 5)
Pulse width modulation control with tachometer
1.39 CFM
8000±10%RPM
Anodised aluminium
11,99 € SU AMAZON
Geekworm
Geekworm H505 Active Cooler Fan for Raspberry Pi 5, Aluminum Heatsink with Blower PWM Fan
Spedizione gratuita
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Raspberry Pi 5 Active Cooler】Aluminum heatsink with blower PWM fan for Raspberry Pi 5 16GB / 8GB / 4GB; Model: H505
【PWM Fan Speed Control】H505 active cooler uses a blower fan to expel heat more efficiently. Supports PWM speed regulation
【Good Heat Dissipation】With ultra-quiet 3007 cooling fan and thermal pads, heat dissipation is ranking right on par with official raspberry pi 5 active cooler
【Application】H505 supports stacking most of the Raspberry Pi 5 expansion boards, but not compatible with X1003 as X1003 should install with official active cooler or H501 (ASIN: B0D2VWTQXR)
【Packing List】1 x H505 active cooler for Raspberry Pi 5, 1 x 3007 Cooling Fan, 1 x Thermal Pads Pack
11,50 € SU AMAZON
Waveshare
POE HAT (F) for Raspberry Pi 5, 802.3af/at-compliant, Power Over Ethernet HAT Expansion Board for Raspberry Pi 5, with Metal Heatsink,Onboard Cooling Fan
Spedizione gratuita
86
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
POE HAT with standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi 5
By using this small HAT and some proper 802.3af/at-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
PoE (Power Over Ethernet) capability，IEEE 802.3af/at-compliant.x
Fully isolated switched-mode power supply (SMPS)
Onboard high speed active cooling fan, with metal heatsink, better heat dissipation
29,90 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 Embedded Heatsink with Fan, Raspberry Pi 4B Armor Aluminum Radiator with 5V Cooling Fan Compatible with Raspberry Pi 4 Model B & Pi 4 Expansion Board
Spedizione gratuita
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
[Ultra-thin Pi 4 Heatsink] Geekworm embedded aluminum heatsink with only 7mm thickness, compatible with Raspberry Pi 4 1GB/2GB/4GB/8GB
[Cooling Solution] Support installing raspberry pi 4 expansion board above the heatsink, so you can cooling down the raspberry pi 4 even when using with pi 4 expansion board(DO NOT support PoE board)
[M2.5 internal thread mounting hole] Raspberry Pi HAT mounting hole is M2.5 internal thread(this design is convenient for maintenance)
[Fan Supported] Supports the installation of 25*25mm fan(equipped with a 5V cooling fan); Cooling fan can be added when the heat dissipation of a single aluminum heat sink is not enough
[About Spacers] We only keep the M2.5*5+4mm, M2.5*5+5mm, M2.5*13+6mm spacers in the P165-A packing list, due to the Raspberry Pi expansion board usually with 12mm or 20mm height, the three spacers combination is enough in application
12,89 € SU AMAZON
ATATMOUNT
ATATMOUNT 8Pcs / Lot Fastener Mount Pin per Intel Socket LGA 775 CPU Heatsink Cooling Fan
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Colore bianco e nero.
Facile da installare e facile da usare.
Costruzione in plastica durevole e di alta qualità.
Installazione facile, tempo di servizio lungo.
Solo perni di montaggio, nessun altro dispositivo è incluso.
3,98 € SU AMAZON
GPM
GPM Upgrade Parts for Traxxas TRX-4 Trail Defender Crawler/TRX-6 Merc-Benz G63 Aluminium 35mm Motor Heatsink with Cooling Fan - 1 Set Red
77
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Product Name : Aluminium 35mm Motor Heatsink With Cooling Fan - 1 Set
Item No. : TRX4018FAN-R
This product provides a double cooling effect for the motor by having a cooling fan on top of the heatsink to achieve better result. Suitable for all 540 motors.
Accessories included : Cooling Fan Lid-1pc ; 35mm Heat Sink-1pc ; Cooling Fan-1pc ; Stainless Steel Flat Head Screw 3x16-4pcs ; Plug Adapter-1pc.
Will fit : 1/10 Traxxas TRX-4 Defender Trail Crawler (82056-4), TRX-6 Mercedes-Benz G63 AMG 6X6 Crawler (88096-4)
19,38 € SU AMAZON
Jungle Leopard
Jungle Leopard S50 M.2 2280 ARGB Hard Drive Heatsink PWM Dual Fan Solid State Drive Radiator M2 SSD Cooling 5V 3Pin Addressable RGB Sync SSD Cooler with Thermal Pad (White)
Spedizione gratuita
74
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Jungle Leopard S50 Double sided Radiator: This M.2 NVMe 2280 SSD cooler comes with 50mm silent cooling fans on each side of the radiator. Keep your M.2 SSD cool and reliable. Efficient heat dissipation, improving stability and durability.
Two 50mm cooling fans: with a speed of up to 4000 RPM and low-noise operation (<26 dB (A)), ensuring ultimate M.2 NVMe SSD cooling performance. Say goodbye to overheating issues and enjoy the enhanced stability of valuable data.
ARGB lighting effect: Supports mainstream motherboard RGB lighting synchronization, and different lighting effects can be set through software. Rich lighting atmosphere. Perfect for gamers, professionals, and anyone seeking reliable storage solutions.
Product parameters: Product Model: S50; Fan Size：50*50*10mm；Fan Speed：1500-4000+10%RPM；Fan Airflow：6.9CFM；Fan Air Pressure：2.8mmH20；Fan Noise：26dB(A)； Connection Type：2510-4Pin/AURA-3Pin(F/M)； Bearing Type：Hydraulic Bearing；Rated Voltage：FAN:DC 12V/LED: DC 5V；Rated Current：FAN:0.13A/LED:0.216A；Power Rating：2.64W
Packaging: Includes S50 M.2 NVMe 2280 SSD cooler, thermal pad
11,39 € SU AMAZON
IBest
IBest Poe Hat for Raspberry Pi 4B 3B+,802.3af/at-Compliant,Power Over Ethernet Hat (D) Expansion Board for Raspberry Pi,with Cooling Fan And Heatsink,Tailored for Raspberry Pi Official Case
Spedizione gratuita
69
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
Suitable for Raspberry Pi 3B+/4B, can be used together with the official Raspberry Pi shell, not taking up more space
Support PoE Power over Ethernet, support 802.3af PoE network standard
Fully isolated switch mode power supply (SMPS)
Onboard high speed active cooling fan, better heat dissipation
25,40 € SU AMAZON
fan with light
chandelier with fan
fan with remote
hat with fan
led with fan
fan with ice
#1 VINCITORE
