Hat Raspberry Pi 4
I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento:
5 ottobre 2025
Waveshare
Power over Ethernet (PoE) HAT per Raspberry Pi 4B / 3B+, Standard 802.3af/at PoE Rete, 5V USB-A e 12V Uscite Header, Ventola di Raffreddamento HAT PoE Integrata e Chip Buck MP8676, Isolato
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
【PoE HAT For Raspberry Pi 4B/3B+】Standard Raspberry Pi 40PIN GPIO header, supports Raspberry Pi 3B+/4B, allows Power Over Ethernet HAT connecting other HATs.
【Power Over Ethernet】PoE (Power Over Ethernet) capability, IEEE 802.3af/at-compliant power sourcing equipments, providing both network connection and power supply for your Raspberry Pi in one Ethernet cable.
【PoE HAT Isolated】Fully isolated switched-mode power supply (SMPS)
【5V USB-A & 12V Header Outputs】5V USB-A provides up to 4A output (MAX 25W for 12V+5V total output power), While providing stable power for the Raspberry Pi, there's also a USB-A port for powering extra external device.
【Onboard Cooling Fan and MP8676 Buck Chip】PoE HAT with high speed active cooling fan, better heat dissipation, incorporates MP8676 original voltage buck chip, providing up to 4.5A output for Raspberry Pi and USB-A port.
24,99 € SU AMAZON
GeeekPi
GeeekPi Power Over Ethernet Poe Hat Support IEEE 802.3af o 802.3at Poe Standard,con Raspberry Pi Ventola di Raffreddamento 30x30x7mm per Raspberry Pi 4 Modello B / 3B + 3B Plus
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Compatibile con: Raspberry Pi 4 Modello B / Raspberry Pi 3 Modello B +
Ventola di raffreddamento integrata da 30 x 30 x 7 mm
Supporto IEEE 802.3af o 802.3at PoE standard
Circuito di protezione: sovratensione transitoria, blocco di sottotensione, arresto termico, limitazione corrente di ripiegamento
Wiki:https://wiki.52pi.com/index.php/Power-Over-Ethernet_(PoE)_HAT_for_RPi_4B/3B%2B_SKU:_EP-0115
19,99 € SU AMAZON
Geekworm
Geekworm Raspberry Pi 4 Case, Raspberry Pi Universal HAT Size Case DIY Kit, Acrylic Case for Raspberry Pi 5 / Raspberry Pi 4B / 3B+ / 3B / 2B and Raspberry Pi Hat Expansion Board
Spedizione gratuita
93
QUALITÀ OTTIMA
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
It is a universal acrylic case DIY kit to install raspberry pi hat expansion board with Raspberry Pi 5 / Raspberry Pi 4 / 3B+ / 3B together.
This is a Protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
Compatible with Raspberry Pi 4 Model B/ Pi 3 Model B+ / Pi3 Model B/ 2B / B+ and Pi Hat expansion board (Like X708 UPS/X728 UPS).
Packing List: 1 x Acrylic Case; 1 x Pack of Screws. (The raspberry pi or the expansion board is not included)
10,00 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 Case in Alluminio con Ventola e Dissipatore - Supporta POE Hat - per Modello B
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
【Increased Height Case】This case is higher than normal cases. It is compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB, and also supports POE Hat. For Case with ICE Tower Cooler kit, ASIN: B0CC1DGR99
【Easy Access to all Ports】GeeekPi Raspberry Pi 4 Case can accurately access power port, micro HDMI ports, audio port, usb ports, Gigabit Ethernet port, sd card slot.
【Good Cooling Effect】With 40mm quiet cooling fan and aluminum heatsinks provide Raspberry Pi 4 with a good cooling effect.
【High Quality Aluminum Material】GeeekPi Raspberry Pi 4 Case is made of high quality aluminum alloy; Sturdy and durable; Keep your Pi 4 Board free from dust, scratches and damage.
【Good Reception of Signals】With acrylic top panel, it won't block Wifi or Bluetooth signal.
【NOTE】This case is only for GeeekPi POE Hats ( B08MPZD47R and B08CVDQWXF ) and Raspberry Pi Official POE+ HAT.
【WiKi】wiki.52pi.com/index.php?title=ZP-0153
15,99 € SU AMAZON
Raspberry Pi
Raspberry TV-Shield DVB-T2
83
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
Adatto per tutti i Raspberry con sintonizzatore TV GPIO a 40 pin Sony CXD2880
Il modulo è compatibile con tutti i Raspberry, che dispone di un GPIO a 40 pin.
Specifiche tecniche: sintonizzatore TV Sony CXD2880 Supporta TV standard: DVB-T2, DVB-T Frequenza di ricezione: VHF III, UHF IV, UHF V larghezza di banda DVB-T2: 1,7 MHz, 5 MHz, 6 MHz, 7 MHz, 8 MHz. Larghezza banda di frequenza DVB-T: 5 MHz, 6 MHz, 7 MHz, 8 MHz. Temperatura di funzionamento: da 0
26,19 € SU AMAZON
Waveshare
Waveshare HUB HAT per Raspberry Pi 4 con 4 Porte USB 3.2 Gen1 - Velocità Dati Fino a 5 Gbps - Plug and Play Senza Driver - Scheda di Espansione USB
Spedizione gratuita
82
QUALITÀ AFFIDABILE
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
This is a driver-free 4 ports USB 3.2 Gen1 hub HAT for Raspberry Pi, provides more USB capability to your Pi, make it easy to connect more USB devices. The HAT features standard Raspberry Pi 40PIN GPIO extension header, when working with Raspberry Pi 4, the USB 3.2 Gen1 ports is able to provide up to 5 Gbps data rate, which means 10 times faster than USB 2.0.
4x USB 3.2 Gen1 ports, compatible with USB 3.0 / 2.0 /1.1,Onboard external USB-C 5V DC power port, ensures more stable power supply
1x power indicator and 4x USB port indicators, easy to check the operating status
Driver-free, plug and play, compatible with OS including Windows, mac OS, Linux and Android
Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi version as well,Comes with development resources and manual
26,99 € SU AMAZON
Waveshare
Waveshare 4G/3G/2G/GSM/GPRS/GNSS Hat for Raspberry Pi 4 Jetson Nano Based on SIM7600E-H Supports LTE CAT4 for Downlink Data Transfer
Spedizione gratuita
78
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT.
Baudrate: 300bps ~ 4Mbps (default: 115200bps). Autobauding baudrate: 9600bps ~ 115200bps. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set).
Supports dial-up, telephone call, SMS , mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
77,99 € SU AMAZON
Waveshare
Waveshare USB HUB HAT (B) for Raspberry Pi 4B/3B+/3A+/2B/Zero/Zero W/Zero WH with 4X USB 2.0 Ports Support USB 2.0/1.1
75
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
✅Extended 4x USB 2.0 Ports, Suitable For Raspberry Pi Series
✅4x extended USB ports, compatible with USB 2.0 / 1.1
✅Pogo pin design, for direct connecting with Raspberry Pi Zero/Zero W/Zero WH
✅USB HUB connector, for connecting with Raspberry Pi 4B/3B+/3A+/2B through USB cable
16,15 € SU AMAZON
GeeekPi
GeeekPi Raspberry Pi 4 HAT PoE isolato Supporto standard PoE IEEE 802.3af o 802.3at, con Raspberry Pi Ventola 30x30x7mm e Dissipatore per Raspberry Pi 4 Modello B / 3B + 3B Plus
Spedizione gratuita
72
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Standard : IEEE 802.3af-2003 PoE
Tensione di ingresso: 37 ~ 57 V CC, dispositivo di Classe 2; Tensione di uscita: 5 V CC / 2,5 A.
Raffreddamento: ventola senza spazzole da 30 mm x 30 mm con 4 lavelli
Alimentatore switching completamente isolato
Supporto tecnologico: https://wiki.52pi.com/index.php/RPi_Isolated_PoE_Hat_SKU:_EP-0127
21,99 € SU AMAZON
Geekworm
Geekworm X1001 PCIe to M.2 NVMe SSD Shield per Raspberry Pi 5
Spedizione gratuita
64
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
【Compatibility】only for Raspberry Pi 5 16GB / 8GB / 4GB (NOT included)
【Matching Case (NOT included)】P579 Case (ASIN: B0CRB3DT5M); Or P579 Case with Official Active Cooler (ASIN: B0CT4P893Q)
【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation.【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1001#Important_Notes
【How to Power】Use 5Vdc +/-5%, 5A to power via Raspberry Pi 5, and Pi 5 will power X1001 via FFC PCIe ribbon. Recommend to use Geekworm PD 27W power adapter (ASIN: B0CP8SRXSC / B0CZCZF2QV)
【Packing List】1 x X1001 Shield, 1x Accessories Pack
16,40 € SU AMAZON
raspberry pi 4 hat
raspberry pi 4 dac hat
raspberry pi 4 usb hat
raspberry pi 4 ssd hat
raspberry pi 4 ups hat
ssd hat raspberry pi 4
raspberry pi 4 tv hat
raspberry pi 4 fan hat
raspberry pi 4 hdd hat
raspberry pi 4 hat sata
#1 VINCITORE
