main logo

E-paper E-ink Touch Display

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 6 ottobre 2025
IBest
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 20,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 "Tocco E-Paper E-Ink Display HAT Per Raspberry Pi 5 punti Touch capacitivo 296 × 128 pixel in bianco e nero Supporto Aggiornamento parziale Interfaccia SPI
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • Modulo ePaper capacitivo da 2,9 pollici, risoluzione 296 × 128. Supporto touch a 5 punti, gesto di sveglia definito dall'utente.
  • Nessuna retroilluminazione, continua a visualizzare l'ultimo contenuto per un lungo periodo di tempo anche quando si spegne.
  • Consumo energetico ultra basso, praticamente l'alimentazione è necessaria solo per rinfrescare.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede della serie Raspberry Pi.
  • Interfaccia di controllo invertita, per il collegamento con schede controller come STM32, ecc. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi).
  • 36,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#3

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • Comes with development resources and manual (examples for Raspberry Pi)
  • 35,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface
Spedizione gratuita
star

92

QUALITÀ OTTIMA

VEDI SU AMAZON
Amazon.it
#4

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down，Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage.Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for long time. You need to update the content of three-color e-Paper at least one time every 24h to avoid from burn-in problem.
  • 67,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display HAT for Raspberry Pi Black/White Color 250×122 Pixels, Support Partial/Full Refresh 5-Point Capacitive Touch with SPI Interface
star

82

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels,Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down,Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • 31,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 7.3inch 6-Color E-Paper Screen With Driver Board, E-Ink Display(E Type), Low Power Consumption, 800x480 Pixel, SPI Communication, Suitable For Price Tag, Asset/Equipment Tag, Shelf Label...
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • 7.3inch e-Paper HAT (E) - with e-Paper Driver HAT. Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • No backlight, keeps displaying last content for a long time even when power down. With standard Pi 40PIN GPIO extension header for Raspberry Pi series boards/Jetson Nano
  • Ultra low power consumption, basically power is only required for refreshing. Adapting SPI interface for Raspberry Pi/Jetson Nano/STM32 controller boards
  • Can provide with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/STM32)
  • Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
  • 107,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13 Inch e-Paper Display HAT 250x122 Resolution V4 E-Ink Screen Electronic Paper Module with Embedded Controller for Raspberry Pi 2B 3B 3B+ 4B Zero Zero W,SPI Interface
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • Si tratta di un V4 (l'ultima versione) E-Ink display HAT per Raspberry Pi, 2.15 pollici, risoluzione 250x122, con controller incorporato, che comunica tramite interfaccia SPI, supporta l'aggiornamento parziale.
  • A causa dei vantaggi come il consumo energetico ultra basso (fondamentalmente l'alimentazione è necessaria solo per rinfrescare), ampio angolo di visione, display chiaro senza elettricità, è una scelta ideale per applicazioni come etichette per scaffali, strumenti industriali e così via.
  • Intestazione di estensione standard Raspberry Pi 40PIN GPIO, supporta schede Raspberry Pi/Jetson serie Nano
  • Interfaccia SPI, per il collegamento con altre schede controller come Nucleo, ecc.
  • Traduttore di tensione integrato, compatibile con MCU 3.3V/5V. Viene fornito con risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32). Si prega di contattare il nostro servizio clienti 24 ore su 24 per risorse e manuali pertinenti
  • 20,99 € SU AMAZON
IBest
IBest
2.13inch Passive NFC-Powered e-Paper Black/White e-Ink Display, No Battery Required, Wireless Powering and Data Transfer,Refreshed By Smartphone
Spedizione gratuita
star

72

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • 2.13" NFC-Powered E-Paper,Adopts Novel Passive NFC Technology,No Battery Required, No More Battery Life Trouble
  • Wireless NFC-Powered Display Refreshing.Passive NFC Solution, No Battery Required, No Messy Wiring, Stable Operation
  • No backlight required, e-Paper keep displaying the last content for a long time without power
  • No power adapter required.Compe with ABS case
  • You can modify the display content by smartphone.App is provided
  • 34,55 € SU AMAZON
Coolwell
Coolwell
Coolwell 2.13inch Touch E-Paper E-Ink Display Module For Raspberry Pi Zero/Zero W, with ABS Protection Case, 5-point Touch,250×122 Pixels
star

65

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels
  • Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
  • 35,51 € SU AMAZON
e-paper display touch e ink electronic paper display display e ink display e-ink e ink display e-ink display e ink e paper e ink paper e-ink paper e-paper e-ink