Display Raspberry Pi Zero W 2.8 Pollici
I 10 migliori prodotti di giugno 2025
Ultimo aggiornamento:
18 giugno 2025
IBest
2.13inch E-paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface
Spedizione gratuita
99
QUALITÀ MASSIMA
VEDI SU AMAZON
Amazon.it
#1 VINCITORE
▼ Mostra di più
▲ Mostra di meno
Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH
Ultra low power consumption, basically power is only required for refreshing
SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
Onboard voltage translator, compatible with 3.3V/5V MCUs,Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
No backlight, keeps displaying last content for a long time even when power down
20,62 € SU AMAZON
Waveshare
Waveshare 2.8inch Capacitive Touch Screen LCD for Raspberry Pi 480×640 DPI IPS Display Fully Laminated Toughened Glass Cover Low Power Solution
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#2
▼ Mostra di più
▲ Mostra di meno
Il display orientation is portrait by default, 480×640 resolution (H×V). Cambia il software config per il display del paesaggio.
Based on Raspberry Pi 40PIN GPIO header. Driven by Raspberry Pi DPI666 interfaccia, up to 60Hz refresh rate.
4-Point touch control through Raspberry Pi I2C interfaccia.
Supporti sistemi come Raspbian, Kali. Supporti future versione which is backward compatibile.
Up to 5-points toughened glass panel, fully laminated screen, best display experience, dust-proof.
39,99 € SU AMAZON
xicoolee
XICOOLEE 1.3inch LCD Display Module, Embedded ST7789 Driver, 240×240 Resolution IPS Screen 65K RGB Color SPI Interface,Supported Raspberry Pi Zero/Zero W/Zero 2W/Zero WH/2B/3B/3B+/4B
Spedizione gratuita
96
QUALITÀ SUPERIORE
VEDI SU AMAZON
Amazon.it
#3
▼ Mostra di più
▲ Mostra di meno
1.1.3inch LCD Display for Raspberry Pi Zero/Zero W/Zero 2W/Zero WH/2B/3B/3B+/4B,embedded ST7789 driver;
2.240×240 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect;
3.SPI interface, less pin occupation, Backlight: LED, Operating voltage: 3.3V;
4.onboard a joystick and six buttons,based on Raspberry Pi 40pin GPIO connector design;
5.Provides open source demo codes that can be used with the Raspberry Pi development board.
13,98 € SU AMAZON
Waveshare
Waveshare 7.5 inch E-Paper HAT Display Module, 800 x 480 Resolution, Supports Black/White 2 Colours, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Spedizione gratuita
91
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#4
▼ Mostra di più
▲ Mostra di meno
Note: This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there is a V2 label on the back of the screen, you can directly use the program for V2.
This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like Raspberry/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32). Rich WiKi Resources: We provide official Wiki resources, please visit our store and click the wiki page to get resources.
69,99 € SU AMAZON
Waveshare
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case
88
QUALITÀ DISTINTA
VEDI SU AMAZON
Amazon.it
#5
▼ Mostra di più
▲ Mostra di meno
2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi Zero / Zero W
Comes with development resources and manual (examples for Raspberry Pi)
35,19 € SU AMAZON
Waveshare
Waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution, Supports Black/White 2-Color, Compatible with Jetson Nano/Raspberry Pi 4B/3B+/3A+/3B/2B/1B+/1A+/Zero 2 W/Zero W/Zero
Spedizione gratuita
81
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#6
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display HAT for Raspberry Pi, 2.13inch, V4 latest version 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano. SPI interface, for connecting with other controller boards like/Nucleo, etc. Onboard voltage translator, for 3.3V/5V MCUs.
Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32).
20,99 € SU AMAZON
Waveshare
Triplo LCD HAT per Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B, Integrato Schermo Principale 1.3 Pollici IPS LCD, Doppio Schermo Secondario 0.96 Pollici IPS LCD, Comunicazione SPI
80
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#7
▼ Mostra di più
▲ Mostra di meno
Triple LCD HAT for Raspberry Pi onboard 1.3inch IPS LCD main screen, with built in ST7789 driver chip, SPI interface communication, supports 65K color display, 240×240 resolution, support clear and vivid color image display, suitable for various application scenarious
Onboard dual 0.96inch LCD secondary screens, with built in ST7735S driver chip, SPI interface communication, supports 65K color display, 160×80 resolution, can be used to display key informations, status indicator messages or small graphics
Onboard 2x user-defined keys for extended applications, supports customizing the key function, easy to use
Onboard standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi series boards, easy to integrate
Comes with online Development Resources and Technical Support (Raspberry Pi/VisionFive2/Arduino/STM32, etc.), if you have any question, feel free to contact us
24,90 € SU AMAZON
AZDelivery
AZDelivery 3 x 2,8 pollici LCD TFT Touch Display per Arduino e Raspberry Pi
Spedizione gratuita
76
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#8
▼ Mostra di più
▲ Mostra di meno
Versatile display touch LCD TFT da 2,8 pollici, compatibile con Arduino e Raspberry Pi, offre immagini luminose e chiare per i vostri progetti di microcontrollore.
Dispone dell'affidabile driver ILI9341 e di una risoluzione 320x240 per immagini nitide e vivaci, con colori RGB 65K per un display ricco.
Facile da integrare tramite interfaccia SPI e tensioni di funzionamento da 3,3 V a 5 V, offre un'ampia compatibilità con diversi sistemi.
Dotato di un accattivante touch screen resistivo, controllato dal controller touch XPT2046 per navigazione e interazione intuitive.
✅ Questo prodotto viene fornito con un e-book completo che fornisce istruzioni di installazione rapide, esempi di utilizzo e librerie per avviare il tuo progetto più velocemente.
39,99 € SU AMAZON
iiunius
Display E-Ink da 2,7 pollici per Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH e Jetson Nano 264 x 176 Pixel Black White Two-Color 3,3 V/5 V E-Paper Screen LCD SPI Interface Support Partial Refresh
71
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#9
▼ Mostra di più
▲ Mostra di meno
Intestazione GPIO a 40 pin: standard per Raspberry Pi 40 pin, compatibile con le schede Raspberry Pi Series e Jetson Nano
Nessuna retroilluminazione: il display E-ink da 264 x 176 cm è dotato di display E-ink per Raspberry Pi, nessuna luce posteriore, mantiene il contenuto di visualizzazione per un lungo periodo anche quando si è in esaurimento, consumo energetico ultra basso, la potenza di base è necessaria solo per la rigenerazione
Interfaccia SPI Control Interface: interfaccia di controllo SPI Onboard, per l'utilizzo con schede di controllo, come Raspberry Pi/Jetson Nano/Arduino/STM32; 4 chiavi per applicazioni estese
Trasformatore di tensione: Waveshare 264 x 176, il display E-ink da 2,7 pollici è compatibile con trasformatore di tensione Raspberry Pi onboard, compatibile con MCU da 3,3 V/5 V
Esempi di applicazione: adatto per etichette di prezzo, etichette di asset/attrezzature, etichette per lo shelf, tag nome conferenza...
Risorse di sviluppo e manuale: include risorse di sviluppo e manuale (esempi per Raspberry Pi/Jetson Nano/Arduino/STM32)
23,03 € SU AMAZON
Waveshare
Waveshare 2.7 Inch E-Paper Display HAT Module Kit 264x176 Resolution 3.3v E-ink Electronic Paper Screen with Embedded Controller for Raspberry Pi 2B 3B Zero Zero W SPI Interface
68
QUALITÀ BUONA
VEDI SU AMAZON
Amazon.it
#10
▼ Mostra di più
▲ Mostra di meno
This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
No backlight, keeps displaying last content for a long time even when power down.Onboard 4x Keys
Ultra low power consumption, basically power is only required for refreshing.Onboard voltage translator, compatible with 3.3V/5V MCUs
Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano。Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
24,69 € SU AMAZON
display raspberry pi zero 2 w
raspberry pi zero 2 w display
raspberry pi zero 2 display
display raspberry pi zero w
raspberry pi zero 2 w display case
raspberry pi zero w display
raspberry pi 2 zero w
raspberry pi zero 2 w
raspberry pi zero 2 w+
raspberry pi zero w 2
#1 VINCITORE
