main logo

Display E-ink Arduino

I 10 migliori prodotti di ottobre 2025
Ultimo aggiornamento: 6 ottobre 2025
IBest
IBest
1.54inch E-paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#1 VINCITORE

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • No backlight, keeps displaying last content for a long time even when power down
  • 19,62 € SU AMAZON
Waveshare
Waveshare
Waveshare 4.2 Inch E-Paper Display Module Kit 400 x 300 Resolution 3.3v/5v E-ink Electronic Screen with Embedded Controller SPI Interface for Raspberry Pi/Jetson Nano/Arduino,Support Full Refresh
Spedizione gratuita
star

98

QUALITÀ MASSIMA

VEDI SU AMAZON
Amazon.it
#2

  • This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface.
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down.SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).Onboard voltage translator, compatible with 3.3V/5V MCUs.
  • 45,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface
Spedizione gratuita
star

96

QUALITÀ SUPERIORE

VEDI SU AMAZON
Amazon.it
#3

  • This is an E-Ink display module, 2.9inch, 296x128 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Due to the advantages like ultra low power consumption, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
  • 24,99 € SU AMAZON
iiunius
iiunius
3.97" e-Paper Display Module, 800×480 Color E-Ink Screen, SPI Interface, for Raspberry Pi HAT+, Compatible with Jetson Nano/Arduino/ESP32, Low Power, 4-Color E-Ink Panel
Spedizione gratuita
star

91

QUALITÀ DISTINTA

VEDI SU AMAZON
Amazon.it
#4

  • 📺 4-Color E-Ink Display Module (800×480 Resolution): This 3.97-inch e-paper screen supports red, yellow, black, and white colors, offering excellent visibility and sharp image quality—perfect for status panels, dashboards, and shelf labeling.
  • 🔗 SPI Communication Interface for Easy Integration: Equipped with a standard SPI interface, this e-ink module is compatible with Rasp-berry Pi HAT+, Ar-duino, Jetson Nano, STM32, and ESP32—ideal for makers, engineers, and educators.
  • 🔋 Ultra-Low Power Consumption: Consumes almost no power when static content is displayed—great for off-grid projects, battery-operated signage, and long-term data displays.
  • 🧩 Rasp-berry Pi HAT+ Standard Compatible: Built with a standard 40PIN GPIO header and conforms to the HAT+ form factor, allowing seamless connection to Rasp-berry Pi and other single-board computers.
  • ⚙️Voltage Translator Onboard for 3.3V/5V MCUs: Features integrated voltage level conversion for wide MCU compatibility, supporting both 3.3V and 5V systems without additional circuitry.
  • 33,59 € SU AMAZON
Waveshare
Waveshare
Waveshare 1.54 inch E-Paper Screen Display Module 200x200 3.3v E-Ink Electronic Display with Embedded Controller SPI Interface Support Partial Refresh for Raspberry Pi/Arduino/Nucleo/Jetson Nano
Spedizione gratuita
star

87

QUALITÀ AFFIDABILE

VEDI SU AMAZON
Amazon.it
#5

  • This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs; SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 19,19 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch Flexible E-Ink Raw Display Without PCB 212x104 Black/White Dual-Color E-Paper SPI Interface Supports Partial Refresh for Raspberry Pi/Arduino/STM32
star

81

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#6

  • This is a flexible E-Ink raw display, 2.13inch, 212x104 resolution, with embedded controller, communicating via SPI interface, supports partial refresh
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Arduino/STM32)
  • Down wiki: www.waveshare.com/wiki/2.13inch_e-Paper_HAT_(D)
  • 12,95 € SU AMAZON
xicoolee
xicoolee
7.5inch E-Paper Display 800x480 Resolution, SPI Interface E-Ink Screen for Raspberry Pi, Arduino, STM32, ESP32 - Monochrome HAT with Partial Refresh & Open-Source Code
Spedizione gratuita
star

78

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#7

  • High-Resolution E-Ink Display – 7.5-inch monochrome E-Paper screen with 800x480 resolution, delivering crisp text and graphics for e-books, digital signage, industrial labels, and IoT projects.
  • Fits Raspberry Pi & Multi-Board – Designed for Raspberry Pi 40-pin GPIO (all models) and pre-configured SPI interface for Arduino, STM32, and ESP32 integration. Level-shifting chip supports 3.3V/5V microcontrollers.
  • SPI Communication & Partial Refresh – Optimized SPI interface minimizes pin usage and enables fast full/partial refresh modes to reduce power consumption and screen flickering.
  • Open-Source Development Support – Includes ready-to-use C/Python code for Raspberry Pi and Arduino/STM32/ESP32 examples for drawing shapes, text, and images. Ideal for DIY and industrial prototyping.
  • Versatile E-Paper Applications – Perfect for e-readers, smart price tags, logistics labels, conference nameplates, electronic memos, and energy-efficient digital billboards.
  • 59,50 € SU AMAZON
IBest
IBest
5.65inch E-paper Display Module 600×448 Pixels Colorful ACeP 7-Color E-Ink Display eink Screen epaper for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano,STM32,Arduino
Spedizione gratuita
star

76

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#8

  • The e-paper with advanced Color ePaper (ACeP) technology, supports 7-Color display
  • Onboard SPI interface, for connecting with controller boards like Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH/Jetson Nano/Arduino/STM32, etc.
  • No backlight, keeps displaying last content for a long time even when power down.Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs.Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Package Content:5.65inch e-Paper Module (F) x1;PH2.0 20cm 8Pin x1
  • 72,99 € SU AMAZON
Waveshare
Waveshare
Waveshare 2.13inch e-Paper Display Hat 250x122 Resolution SPI E-Ink Screen Electronic Paper Module with Embedded Controller Partial Refresh for Raspberry Pi Zero/Zero W/Zero WH for pwnagotchi Project
Spedizione gratuita
star

71

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#9

  • V4 Latest Version.Note:Please use corresponding demo code in wiki.No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+,Jetson Nano
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual (examples for Raspberry/Jetson Nano/Arduino/STM32)
  • 20,99 € SU AMAZON
Waveshare
Waveshare
2.13 inch E-Paper Display Hat (G) 250 x 122 Resolution 3.3 V/5 V Four-Colour e-Ink Display Paper Screen Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH, Jetson Nano,Arduino
Spedizione gratuita
star

67

QUALITÀ BUONA

VEDI SU AMAZON
Amazon.it
#10

  • No backlight, keeps displaying last content for a long time even when power down
  • SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • 24,99 € SU AMAZON
display e ink arduino e ink display arduino e-ink display arduino e ink arduino e-ink arduino display e ink display e-ink e ink display e-ink display arduino e display